Logic Output Optoisolators
-
Industrial Logic Optocoupler Broadcom HCPL-2631-500E Featuring High Speed and TTL Compatibility
High CMR, High Speed TTL Compatible Optocouplers Product Overview The Broadcom 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are optically coupled gates designed for high-speed logic interfacing, input/output buffering, and line reception in noisy environments. These optocouplers combine a GaAsP light-emitting diode with an integrated high-gain photo detector, featuring an enable input for strobing and an open-collector Schottky-clamped transistor output. They offer robust common
-
Fast switching optocoupler Broadcom HCPL-4504-500E suitable for inverter dead time and logic isolation
Product Overview The Broadcom HCPL-4504 series, including HCPL-0454, HCPL-J454, and HCNW4504, are high Common Mode Rejection (CMR) and high-speed optocouplers. These devices feature integrated GaAsP or AlGaAs LEDs optically coupled to a high-gain photodetector, offering short propagation delays and high Current Transfer Ratio (CTR). They are designed for applications requiring fast switching and robust isolation, such as inverter circuits, Intelligent Power Module (IPM)
-
Microprocessor interface voltage threshold detection device Broadcom HCPL-0370-500E with hysteresis and diode bridge
Product Overview The HCPL-0370/3700 and HCPL-3760 are voltage/current threshold detection optocouplers designed for industrial control and microprocessor interfacing. The HCPL-3760 offers a low-current version utilizing a high-efficiency AlGaAs LED. These devices feature threshold sensing input buffer ICs that allow for programmable threshold levels with a single external resistor. Key integrated features include hysteresis for enhanced noise immunity, a diode bridge for AC
-
Low threshold input optocoupler Broadcom HCPL-0300-500E designed for RS-232-C and similar interfaces
Product Overview The HCPL-2300/HCPL-0300 is an 8 MBd low input current optocoupler designed for isolated logic and data communication circuits. It features an 820 nm AlGaAs LED with fast rise and fall times at low drive currents, making it suitable for RS-232-C interfaces requiring ground loop isolation and improved common mode rejection. This optocoupler offers guaranteed low input thresholds (IF = 0.5 mA, VF 1.5 V) and high-speed operation (guaranteed 5 MBd over temperature
-
High speed optocoupler Broadcom HCPL-0601-500E featuring low input current and strong noise immunity
Product Overview The 6N137, HCPL-26xx/06xx/4661, and HCNW137/26x1 series are optically coupled gates that combine a GaAsP light-emitting diode with an integrated high-gain photodetector. Featuring high speed (10 MBd typical), LSTTL/TTL compatibility, and low input current capability (5 mA), these optocouplers offer robust isolation for various applications. They are designed for high-speed logic interfacing, input/output buffering, and use in environments with extreme ground
-
optocoupler components Broadcom HCPL-0630-500E with open collector Schottky clamped transistor output
High CMR, High Speed TTL Compatible Optocouplers Product Overview These optically coupled gates combine a GaAsP light emitting diode with an integrated high-gain photo detector, offering high speed and TTL compatibility. Featuring an enable input for strobing and an open-collector Schottky-clamped transistor output, these optocouplers provide excellent AC and DC circuit isolation. The internal shield ensures high common mode transient immunity. They are designed for reliable
-
gate drive optocoupler Broadcom HCPL-316J-500E with fault feedback and under voltage lockout protection
Product Overview The HCPL-316J is a 2.5 Amp Gate Drive Optocoupler with integrated VCE desaturation detection and fault status feedback. It offers a compact, affordable, and easy-to-implement solution for IGBT VCE fault protection, satisfying worldwide safety and regulatory requirements. This highly integrated device provides a complete, isolated IGBT gate drive circuit with fault protection and feedback in a single SO-16 package. It is designed to increase the performance
-
High Speed Digital Isolation Optocoupler Broadcom HCPL-0631-500E with Schottky Clamped Transistor
Product Overview The 6N137, HCPL-26xx/06xx/4661, and HCNW137/26x1 series are optically coupled gates designed for high-speed logic interfacing, input/output buffering, and line reception in noisy environments. These optocouplers combine a GaAsP light-emitting diode with an integrated high-gain photodetector, featuring an enable input for strobing and an open-collector Schottky-clamped transistor output. They offer high Common Mode Rejection (CMR) up to 15 kV/s, typical 10 MBd
-
digital optocoupler Broadcom ACPL M61L 500E with Faraday shield and slew rate controlled CMOS outputs
Product Overview The Broadcom ACPL-x6xL series low-power digital optocouplers integrate an AlGaAs LED with a high-gain photodetector, offering efficient digital signal isolation. Consuming minimal power (max 1.3 mA IDD per channel) and requiring as little as 1.6 mA forward LED current, these optocouplers are directly drivable by most microprocessors. They feature a Faraday shield for robust common-mode transient immunity (20 kV/s) and provide TTL/CMOS compatibility. With slew
-
High speed digital isolation optocoupler Broadcom ACPL-024L-500E with CMOS output and wide supply voltage range
Product Overview The Broadcom ACPL-x2xL series comprises optically coupled logic gates designed for high-speed digital isolation. These optocouplers feature a CMOS output stage and an optical receiver input stage with a built-in Schmitt trigger for logic-compatible waveforms, eliminating the need for external wave-shaping. They offer robust common-mode transient immunity (25 kV/s at 1000V) and operate across an extended temperature range (40C to +105C) with a wide supply
-
Optically Coupled Gate Broadcom HCPL-060L-500E with High Gain Photo Detector and 15 kV per Second CMR
Product Overview The HCPL-260L/060L/263L/063L are optically coupled gates that integrate a GaAsP light-emitting diode with a high-gain photo detector. Featuring an enable input for strobing and an open-collector Schottky-clamped transistor output, these optocouplers provide robust AC and DC circuit isolation. With a guaranteed common mode transient immunity of 15 kV/s at 3.3V, they offer LVTTL/LVCMOS compatibility and reliable performance across a wide temperature range (40 C
-
IGBT Gate Drive Optocoupler Broadcom HCPL-3120-500E with Wide VCC Range and High Common Mode Rejection
Product Overview The HCPL-3120, HCPL-J312, and HCNW3120 are high-output current IGBT gate drive optocouplers designed for driving power IGBTs and MOSFETs in motor control inverter applications. These optocouplers feature a maximum peak output current of 2.5 A, a low maximum output low-level voltage (VOL) of 0.5 V, and a wide operating VCC range of 15 to 30 Volts. They offer Under Voltage Lock-Out (UVLO) protection with hysteresis and fast switching speeds up to 500 ns. The
