Logic Output Optoisolators
-
Toshiba TLP2358 TPL E photocoupler featuring photo detector and internal Faraday shield for isolation
Toshiba TLP2358 Photocoupler The Toshiba TLP2358 is a high-speed photocoupler featuring a GaAAs infrared LED coupled with a photo detector. It offers a totem-pole output stage with current sourcing and sinking capabilities, and an internal Faraday shield providing a guaranteed common-mode transient immunity of 20 kV/s. The TLP2358 has an inverter output, with a buffer output version (TLP2355) also available. It is suitable for signal isolation in intelligent power modules,
-
Industrial grade photocoupler TOSHIBA TLP2704 TP E with operating temperature up to 125 degrees Celsius
Product OverviewThe TLP2704 is a photocoupler featuring a GaAAs infrared LED optically coupled with an integrated high-gain, high-speed photo-detector housed in an SO6L package. Designed for signal isolation in applications like Intelligent Power Modules and Factory Automation, it supports operating temperatures up to 125C and meets reinforced insulation class requirements. Its internal Faraday shield guarantees a common-mode transient immunity of 20 kV/s, making it suitable
-
Orient OR 6N137S TA1 optocoupler offering 15MBd speed and 10 kV per microsecond common mode rejection
Product Overview The ORPC-6N137 is a high-speed optocoupler designed for efficient AC and DC isolation between input and output. It comprises an AlGaAs light-emitting diode and a high-speed optical detector with a Schottky clamp transistor output. This device offers low power consumption, high-speed operation up to 15MBd, and excellent common-mode rejection (CMR) of 10 kV/s. It operates reliably across a wide temperature range of -40 to +85, making it suitable for application
-
Optocoupler with 850 nm AlGaAs LED featuring NQUNXIN QX6N130-CuH-S high speed photo detector logic gate
Product OverviewThe QX6N130 optocoupler features an 850 nm AlGaAS LED optically coupled to a very high-speed integrated photo-detector logic gate with a strobable output. It offers a high bit rate of 1Mbit/s, high input-output isolation voltage (5000 Vrms), and a wide operating temperature range (-40C to +125C). This device is suitable for applications such as ground loop elimination, LSTTL to TTL/CMOS conversion, line receivers, data transmission, switching power supplies,
-
Photocoupler RENESAS PS9121-F3-AX with Pb free material and certifications UL CSA VDE option included
Product OverviewThe PS9121 is a high-speed, active low type isolator featuring an AlGaAs LED and a photodiode with signal processing on a single chip. It is designed for high common mode transient immunity (CMR) and low pulse width distortion, making it suitable for high-density applications. This 3.3V photocoupler offers 15 Mbps speed and an open collector output.Product AttributesBrand: Renesas (implied by marking example)Type: PhotocouplerOutput Type: Open CollectorPackage
-
High speed RENESAS PS9821-1-F3-AX photocoupler with 8 pin SSOP package and UL CSA VDE certifications
Product DescriptionThe PS9821-1 and PS9821-2 are active-low type high-speed photocouplers featuring an AlGaAs light-emitting diode on the input and a photodetector IC with a photodiode and signal processor on the output. Designed for high common mode transient immunity (CMR) and low pulse width distortion, these devices operate at 15 Mbps with a 3.3 V supply. The PS9821-2 is optimized for high-density applications. They offer high-speed performance, high isolation voltage,
-
data transmission isolator OPTEK OPI1266 with high voltage isolation and matched propagation delay times
Product Overview The TT electronics OPI1266 is a high-voltage isolator designed to provide maximum DC and AC current isolation between input and output while maintaining TTL/LSTTL circuit compatibility. It features a GaAIAs LED coupled with an integrated circuit detector, including a photodiode, a high-gain linear amplifier, and a Schottky clamped open collector output transistor. The circuit is temperature, current, and voltage compensated, with matched propagation delay
-
RENESAS RV1S9160ACCSP-100V SC0 high speed photocoupler supporting 3.3V and 5V power supply operation
Product OverviewThe RV1S9160A is a high-speed photocoupler designed for 15Mbps communication with active low output logic. It integrates an AlGaAs LED and a photodiode with an IC, enabling low-power operation on 3.3V/5V supplies. This device offers high noise tolerance (50kV/s CMR) and can operate at temperatures up to 125C, making it suitable for logic interface circuits in demanding industrial applications.Product AttributesBrand: Renesas (implied by marking example
-
optocoupler NQUNXIN QX6N137 CuH S with strobable outputs and compliance to UL 1577 safety certification
Product OverviewThe QX6N137 optocoupler features a high-speed integrated photo-detector logic gate coupled to an 850 nm AlGaAS LED, enabling rapid output. It offers a high bit rate of 10Mbit/s, high input-output isolation voltage (5000 Vrms), and operates within a wide temperature range of -40C to +85C. Designed with logic gate and strobable outputs, it meets reinforced insulation standards and is compliant with safety standards such as UL 1577, VDE DIN EN60747-5-5, and CQC11
-
High speed optocoupler NQUNXIN QX0500-CuH-S with UL 1577 and VDE DIN EN60747-5-5 safety certifications
High Speed Photo Coupler QX0500The QX0500 optocoupler integrates an 850nm AlGaAS LED with a high-speed integrated photodetector logic gate for fast output. It offers a high bit rate of 1Mbit/s, high input-output isolation voltage (3750 Vrms), and operates within a wide temperature range of -40C to +125C. Designed with a logic gate output, it meets reinforced insulation standards and various safety certifications including UL 1577, VDE DIN EN60747-5-5, and CQC11-471543-2022.
-
Dual Channel Optocoupler NQUNXIN QX0531 CuH S with Electrical Insulation and High Density Packaging
NINGBO QUNXIN MICROELECTRONICS CO., LTD. High Speed Photo Coupler QX053XThe QX0530, QX0531, and QX0534 are dual-channel optocouplers featuring electrical insulation between input and output. They incorporate a pair of light-emitting diodes and integrated photodetectors. Independent connection for photodiode bias and output transistor collectors significantly enhances speed, achieving over a hundred times the performance of conventional phototransistor couplers. These devices
-
Photocoupler Orient OR-0631-TA1 designed for ground loop elimination and high speed logic ground isolation
Product Overview The Orient OR-0631 is a high-speed photocoupler designed for efficient signal isolation and data transmission. Featuring a 10Mbit/s data rate, 10kV/s common mode transient immunity, and a wide operating temperature range of -40C to 105C, this device is ideal for applications requiring robust performance and high isolation voltage (3750 V rms). Its logic gate output and strobable functionality make it suitable for ground loop elimination, line receivers,
