Logic Output Optoisolators
-
TTL compatible high speed optocoupler Broadcom HCPL-0500-500E with UL CSA and IEC EN safety approvals
Product Overview These single-channel, high-speed diode-transistor optocouplers provide electrical insulation between input and output using an integrated photodetector and LED separated by an insulating layer. They offer enhanced speed compared to conventional phototransistor couplers due to reduced base-collector capacitance. Available in 8-pin DIP, SO-8, and Widebody package configurations, these optocouplers are suitable for TTL/CMOS, TTL/LSTTL, wide-bandwidth analog, and
-
Digital isolation device Broadcom HCNW2601-500E with integrated photodetector and GaAsP LED technology
Product Overview The Avago Technologies 6N137, HCPL-26xx/06xx/4661, and HCNW137/26x1 series are optically coupled gates designed for high-speed logic interfacing, input/output buffering, and isolation in noisy environments. These devices combine a GaAsP light-emitting diode with an integrated high-gain photodetector, featuring an open-collector Schottky-clamped transistor output. An enable input allows for strobing, and an internal shield provides a guaranteed common mode
-
Driving power IGBTs and MOSFETs optocoupler Broadcom HCPL-314J-500E with high operating voltage range
Product Overview The HCPL-314J is an optocoupler designed for driving power IGBTs and MOSFETs in motor control inverter applications. It features an Al-GaAs LED coupled with an integrated circuit and a power output stage, providing the necessary drive voltages for gate-controlled devices. This optocoupler is suitable for directly driving small to medium power IGBTs and offers high operating voltage range. It is available in a DIP8 (single) and SO16 (dual) package and boasts
-
Isolated gate driver optocoupler Broadcom HCPL-3150-500E for high current IGBT and MOSFET gate control
Product Overview The Broadcom HCPL-315X series, comprising the HCPL-3150 (single channel) and HCPL-315J (dual channel), are optically coupled isolators designed for driving power IGBTs and MOSFETs in motor control inverter applications. These optocouplers feature an integrated circuit with a power output stage, providing the necessary drive voltages and currents for gate-controlled devices. They are ideally suited for directly driving IGBTs up to 1200V/50A or for driving
-
Dual Channel Optocoupler Broadcom HCPL-0530-500E High Speed Electrical Isolation for TTL CMOS Applications
Product Overview These dual-channel optocouplers provide electrical insulation between input and output, featuring a pair of light-emitting diodes and integrated photodetectors. Optimized for high speed, they offer up to a hundred times the speed of conventional phototransistor couplers by reducing base-collector capacitance. Available in 8-Pin DIP and SO-8 packages, these optocouplers are suitable for applications requiring line receivers with high common mode transient
-
High Speed Dual Channel Optocoupler Broadcom HCPL-2531-000E with Compact 8 Pin DIP and SO 8 Packages
Product Overview These dual-channel optocouplers provide electrical insulation between input and output, featuring a pair of light-emitting diodes and integrated photodetectors. Optimized for high speed, they offer up to a hundred times the speed of conventional phototransistor couplers by reducing base-collector capacitance. Available in 8-Pin DIP and industry-standard SO-8 packages, these optocouplers are suitable for applications requiring high common-mode transient
-
Broadcom HSSR 7111 300 single pole normally open relay replacement optocoupler for harsh environments
Product Overview The Broadcom HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E, and SMD 5962-9314001, 5962-93140021 are single-channel power MOSFET optocouplers designed for high-reliability applications. These devices function as solid-state replacements for single-pole, normally open (1 Form A) relays, offering ac/dc signal and power switching capabilities in a compact, bidirectional switch. Manufactured and tested on a MIL-PRF-38534 certified line, they are suitable for military
-
Robust digital isolation optocoupler Broadcom 6N137-560E with UL recognized and CSA approved certifications
Product Overview The Broadcom 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are high CMR, high-speed TTL-compatible optocouplers designed for robust digital isolation. These optically coupled gates integrate a GaAsP light-emitting diode with a high-gain photo detector, featuring an enable input for strobing and an open-collector Schottky-clamped transistor output. With guaranteed AC and DC performance from -40C to +85C and exceptional common mode transient immunity (up to 15 kV/s)
-
Broadcom HCPL 2601 500E optocoupler designed for isolated line reception and ground loop elimination
High CMR, High Speed TTL Compatible Optocouplers Product Overview The Broadcom 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are optically coupled gates designed for high-speed logic interfacing and isolation. These optocouplers combine a GaAsP light-emitting diode with an integrated high-gain photodetector, featuring an enable input for strobing and an open-collector Schottky-clamped transistor output. They offer superior common mode transient immunity (up to 15 kV/s) and provide
-
High Speed Diode Transistor Optocoupler Broadcom HCPL-053L-500E with 8 Pin DIP and SO 8 Package Options
Product Overview These diode-transistor optocouplers provide electrical insulation between input and output using an insulating layer between a LED and an integrated photodetector. They offer enhanced speed, up to a hundred times faster than conventional photo-transistor couplers, by reducing base-collector capacitance through separate connections for the photodiode bias and output-transistor collector. Available in 8-pin DIP and SO-8 packages, these optocouplers are suitable
-
Integrated photodetector optocoupler Broadcom HCPL-4504-000E ideal for high speed logic ground isolation and IPM
Product Overview The HCPL-4504 series high CMR, high-speed optocouplers are designed for applications requiring short propagation delays and high common-mode transient immunity. These optocouplers feature an integrated high-gain photodetector and are available with either a GaAsP LED (HCPL-4504/0454) or an AlGaAs LED (HCPL-J454/HCNW4504). They are ideal for inverter circuits, Intelligent Power Module (IPM) interfacing, line receivers, and high-speed logic ground isolation.
-
Dual output intelligent optocoupler Broadcom ACPL-339J-500E for driving IGBT and power MOSFET devices
Product Overview The ACPL-339J is an advanced 1.0 A dual-output intelligent optocoupler designed for driving IGBT and Power MOSFET devices. It offers a scalable gate drive solution for motor control and power conversion applications, allowing system engineers to support various power ratings by interchanging MOSFET buffers without redesigning critical isolation and short-circuit protection circuits. Key features include active timing control to prevent cross-conduction, IGBT
