Logic Output Optoisolators
-
Low Input Current Optocoupler VISHAY VOS618A-3X001T SSOP-4 Package High Isolation Voltage for Industrial Controls
Product OverviewThe VOS618A series is a low input current optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor. Packaged in a 4-pin SSOP-4 mini-flat package with a 50 mil lead pitch, it offers high current transfer ratio at low input current, low coupling capacitance, and high isolation voltage. It is designed for signal transmission between electrically separated circuits and is suitable for applications in telecom, industrial
-
High temperature tolerant TOSHIBA TLP250H TP1F photocoupler suitable for industrial inverter circuits
TLP250H, TLP250HF PhotocouplersThe TLP250H is a photocoupler in a DIP8 package, integrating a GaAAs infrared LED with a high-gain, high-speed photodetector IC. It offers guaranteed performance up to 125C and features an internal Faraday shield for 40 kV/s common-mode transient immunity. Its totem-pole output can sink and source current, making it ideal for driving IGBT and power MOSFET gates. Applications include industrial inverters, air conditioner inverters, and home
-
SOP4 package optocoupler VISHAY VOT8121AM-T featuring GaAs IRLED and photosensitive TRIAC for load control
Product OverviewThe VOT8121AM is an optocoupler featuring a GaAs IRLED coupled to a photosensitive TRIAC in a space-saving SOP-4 package. It provides isolation for low-voltage logic from AC lines (120 VAC, 240 VAC, 380 VAC) and is suitable for controlling various loads including motors, solenoids, high current thyristors/TRIACs, and relays. Key advantages include high static dV/dt, high input sensitivity, and a low input current requirement.Product AttributesBrand: Vishay
-
TOSHIBA TLP3073F photocoupler offering reinforced insulation and isolation voltage for triac drivers
Product OverviewThe TLP3073 and TLP3073F are photocouplers featuring an infrared LED optically coupled to a non-zero crossing photo triac. Designed for applications requiring high insulation and reliable switching, these devices are suitable for solid-state relays, triac drivers, home electric appliances, and office equipment. They meet reinforced insulation class requirements, offering a peak off-state voltage of 800 V (min) and an isolation voltage of 5000 Vrms (min)
-
Signal transmission optocoupler VISHAY SFH615A-3 with high isolation voltage and low CTR degradation
Product Overview The SFH615A is a high-reliability optocoupler featuring a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector. Designed for signal transmission between electrically separated circuits, it offers a variety of transfer ratios, low coupling capacitance, and high isolation voltage (5300 VRMS). This device is suitable for applications requiring robust isolation and fast switching times, with features like excellent CTR
-
optocoupler VISHAY TCLT1007 with flexible current transfer ratio and high isolation voltage in compact SOP4L package
Product OverviewThe TCLT100. series optocoupler features a phototransistor output optically coupled to a gallium arsenide infrared-emitting diode, housed in a 4-lead SOP4L package. Designed for applications requiring reliable electrical isolation, it is suitable for switchmode power supplies, computer peripheral interfaces, and microprocessor system interfaces. Key advantages include its SMD low profile, high isolation voltage (VIORM = 1050 V), flexible CTR options, and
-
Photo Triac Optocoupler TOSHIBA TLP265J E Designed for AC Output Modules and Solid State Relay Circuits
Product OverviewThe TLP265J is a photocoupler featuring a non-zero crossing photo triac optically coupled to an infrared LED. Housed in an SO6 package, it offers a creepage distance of 5.0 mm (min), clearance of 5.0 mm (min), and insulation thickness of 0.4 mm (min), meeting reinforced insulation class requirements for international safety standards. It is designed for applications requiring Triac drivers, Programmable Logic Controllers (PLCs), AC-Output Modules, and Solid
-
Infrared LED photocoupler TOSHIBA TLP3083F LF4 F zero crossing photo triac for home appliance control
Product OverviewThe TLP3083 and TLP3083F are photocouplers featuring an infrared LED optically coupled to a zero-crossing photo triac. Designed for applications requiring solid-state relays, triac drivers, home electric appliances, and office equipment, these devices offer reinforced insulation class requirements of international safety standards due to their 0.4 mm insulation thickness. They are available in DIP6 packages and are halogen-free.Product AttributesBrand: Toshiba
-
IGBT gate drive photocoupler TOSHIBA TLP5214 TP E with 4 amp output current and isolated fault feedback
Product OverviewThe TLP5214 is a highly integrated 4.0A output current IGBT gate drive photocoupler housed in a long creepage and clearance SO16L package. It features IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping, and under voltage lockout (UVLO). This photocoupler is suitable for driving IGBT and power MOSFET in inverter applications, AC and brushless DC motor drives, industrial inverters, and uninterruptible power
-
Low Profile SMD Optocoupler VISHAY TCLT1109 with Gallium Arsenide Infrared LED and Transistor Output
Vishay Semiconductors TCLT110 Series Optocoupler The TCLT110 series optocoupler features a phototransistor optically coupled to a gallium arsenide infrared-emitting diode within a 5-lead SOP-6L package. Designed for applications requiring electrical isolation, it offers a low profile, SMD compatibility, and a high isolation test voltage of 5000 VRMS. This series is suitable for switchmode power supplies, computer peripheral interfaces, and microprocessor system interfaces,
-
Electrical Isolation Component VISHAY SFH6206-2T Optocoupler with Low Coupling Capacitance and High CTR
Product OverviewThe SFH620A (DIP) and SFH6206 (SMD) are optocouplers featuring a high current transfer ratio, low coupling capacitance, and high isolation voltage. They utilize a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector, housed in plastic DIP-4 or SMD packages. These devices are designed for signal transmission between electrically separated circuits and offer end-stackability with 2.54 mm lead spacing. Option 6 provides
-
TOSHIBA TLP2395 TPL E featuring reverse parallel LED configuration and common mode transient immunity
Product OverviewThe Toshiba TLP2395 is a photocoupler featuring two GaAAs infrared LEDs coupled with a high-gain, high-speed photo detector. Housed in an SO6 package, it supports both sinking and sourcing input signals due to its reverse-parallel LED configuration. The device boasts a totem-pole output stage with current sourcing and sinking capabilities, and an internal Faraday shield provides a guaranteed common-mode transient immunity of 20 kV/s. An inverter output version
