IGBT gate drive photocoupler TOSHIBA TLP5214 TP E with 4 amp output current and isolated fault feedback
Key Attributes
Model Number:
TLP5214(TP,E
Product Custom Attributes
Power Dissipation:
410mW
Output Current:
4A
Low Level Delay Time:
150ns
High Level Delay Time:
150ns
Reverse Voltage:
6V
Voltage - Forward(Vf):
1.7V
Voltage - Supply:
15V~30V
Forward Current(If):
12mA
Operating Temperature:
-40℃~+110℃
CMTI(kV/us):
35kV/us
Number Of Channels:
-
Input Threshold Current:
6mA
Isolation Voltage(Vrms):
5kV
Input Type:
DC
Mfr. Part #:
TLP5214(TP,E
Package:
SO-16-300mil
Product Description
Product Overview
The TLP5214 is a highly integrated 4.0A output current IGBT gate drive photocoupler housed in a long creepage and clearance SO16L package. It features IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping, and under voltage lockout (UVLO). This photocoupler is suitable for driving IGBT and power MOSFET in inverter applications, AC and brushless DC motor drives, industrial inverters, and uninterruptible power supply (UPS) systems.
Product Attributes
- Brand: TOSHIBA
- Model: TLP5214
- Certifications: UL-recognized (UL 1577, File No.E67349), cUL-recognized (CSA Component Acceptance Service No.5A File No.E67349), VDE-approved (EN 60747-5-5, EN 62368-1), CQC-approved (GB4943.1, GB8898)
- Package Type: SO16L
- Weight: 0.37 g (typ.)
- Dimensions: Unit: mm
Technical Specifications
| Characteristic | Symbol | Min | Typ. | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | ||||||
| Input forward current | IF | 25 | mA | LED (Note 1) | ||
| Input forward current derating (Ta 95C) | IF/Ta | -1 | mA/C | |||
| Peak transient input forward current (Note 1) | IFPT | 1 | A | |||
| Peak transient input forward current derating (Ta 95C) | IFPT/Ta | -25 | mA/C | |||
| Reverse Input Voltage | VR | 6 | V | |||
| Input power dissipation | PD | 145 | mW | |||
| Input power dissipation derating (Ta 95C) | PD /Ta | -5.0 | mW/C | |||
| Detector Positive Input Supply Voltage | VCC1 | -0.5 | 7 | V | ||
| H peak output current | IOPH | -4.0 | A | Ta = 40 to 110 C (Note 2) | ||
| L peak output current | IOPL | +4.0 | A | |||
| FAULT Output Current | IFAULT | 8 | mA | |||
| FAULT Pin Voltage | VFAULT | -0.5 | VCC1 | V | ||
| Total Output Supply Voltage (VCC2VEE) | -0.5 | 35 | V | |||
| Negative Output Supply Voltage (VEVEE) | -0.5 | 15 | V | |||
| Positive Output Supply Voltage (VCC2VE) | -0.5 | 35 (VEVEE) | V | |||
| Output voltage | VO | -0.5 | VCC2 | V | ||
| Peak Clamping Sinking Current | IClamp | 1.7 | A | |||
| Miller Clamping Pin Voltage | VClamp | -0.5 | VCC2 | V | ||
| DESAT Voltage | VDESAT | VE | VE + 10 | V | ||
| Output power dissipation | PO | 410 | mW | |||
| Output power dissipation (Ta 95C) | PO /Ta | -14.0 | mW/C | |||
| Common Operating temperature range | Topr | -40 | 110 | C | ||
| Storage temperature range | Tstg | -55 | 125 | C | ||
| Lead soldering temperature (10 s) | Tsol | 260 | C | (Note 3) | ||
| Isolation voltage (AC, 60 s, R.H. 60 %) | BVS | 5000 | Vrms | (Note 4) | ||
| Recommended Operating Conditions | ||||||
| Total Output Supply Voltage (Note 5) (VCC2VEE) | 15 | 30 | V | |||
| Negative Output Supply Voltage (VEVEE) | 0 | 15 | V | |||
| Positive Output Supply Voltage (VCC2VE) | 15 | 30 (VEVEE) | V | |||
| Input On-State Current (Note 6) | IF(ON) | 7.5 | 12 | mA | ||
| Input Off-State Voltage | VF(OFF) | 0 | 0.8 | V | ||
| Operating frequency (Note 7) | f | 50 | kHz | |||
| Electrical Characteristics | ||||||
| Input Forward Voltage | VF | 1.4 | 1.7 | V | IF = 10 mA, Ta = 25C | |
| Input Reverse Current | IR | 10 | A | VR = 5 V | ||
| Input Capacitance | Ct | 95 | pF | V = 0 V, f = 1 MHz, Ta = 25 C | ||
| FAULT Low Level Output Voltage | VFAULTL | 0.2 | 0.4 | V | IFAULT = 1.1 mA, VCC1 = 5.5 V | |
| FAULT Low Level Output Voltage | VFAULTL | 0.2 | 0.4 | V | IFAULT = 1.1 mA, VCC1 = 3.3 V | |
| FAULT High Level Output Current | IFAULTH | 0.5 | A | VFAULT = 5.5 V, VCC1 = 5.5 V, Ta = 25C | ||
| FAULT High Level Output Current | IFAULTH | 0.3 | A | VFAULT = 5.5 V, VCC1 = 3.3 V, Ta = 25C | ||
| High Level Output Current (Note 8) | IOPH | 4.0 | 1.2 | A | VO = VCC2 4 V | |
| High Level Output Current (Note 8) | IOPH | 6.5 | 3.0 | A | VO = VCC2 7 V | |
| Low Level Output Current (Note 8) | IOPL | 1.2 | 3.5 | A | VO = VEE + 2.5 V | |
| Low Level Output Current (Note 8) | IOPL | 3 | 5.5 | A | VO = VEE + 7 V | |
| Low Level Output Current During Fault Condition | IOLF | 90 | 150 | 230 | mA | VO VEE = 14 V |
| High Level Output Voltage | VOH | VCC20.3 | VCC20.2 | V | IO = 100 mA | |
| Low Level Output Voltage | VOL | 0.1 | 0.2 | V | IO = 100 mA | |
| Clamp Pin Threshold Voltage | VtClamp | 3.0 | ||||
| Clamp Low Level Sinking Current | ICL | 0.56 | 1.8 | A | VO = VEE + 2.5 V | |
| High Level Supply Current | ICC2H | 2.4 | 3.5 | mA | IO = 0 mA | |
| Low Level Supply Current | ICC2L | 2.3 | 3.5 | mA | IO = 0 mA | |
| Blanking Capacitor Charging Current | ICHG | -0.13 | -0.24 | -0.33 | VDESAT = 2 V | |
| Blanking Capacitor Discharge Current | IDSCHG | 10 | 49 | VDESAT = 7 V | ||
| DESAT Threshold Voltage | VDESAT | 6 | 6.5 | 7.5 | V | VCC2-VEVUVLO- |
| UVLO Threshold Voltage | VUVLO+ | 10.5 | 11.6 | 13.5 | V | VO5 V |
| UVLO Threshold Voltage | VUVLO- | 9.2 | 10.3 | 11.1 | V | VO5 V |
| UVLO hysteresis | UVLOHYS | 1.3 | ||||
| Threshold Input Current(L/H) | IFLH | 2.3 | 6 | mA | 10 VCC = 30 V, VO < 5 V | |
| Threshold Input Voltage (H/L) | VFHL | 0.8 | V | VCC = 30 V, VO > 5 V | ||
| Isolation Characteristics | ||||||
| Capacitance input to output | CS | 1.0 | pF | Vs = 0 V, f = 1 MHz | ||
| Isolation resistance | RS | 1012 | 1014 | R.H. 60 %, VS = 500 V | ||
| Isolation voltage | BVS | 5000 | Vrms | AC, 60 s | ||
| Switching Characteristics | ||||||
| Propagation delay time (Note 9) L H | tpLH | 50 | 85 | 150 | ns | VCC2 = 30 V Rg = 10 Cg = 25 nF Duty = 50% IF = 0 10 mA |
| Propagation delay time (Note 9) H L | tpHL | 50 | 90 | 150 | ns | IF = 10 0 mA |
| Output rise time (1090 %) (Note 9) | tr | 32 | ns | IF = 0 10 mA | ||
| Output fall time (9010 %) (Note 9) | tf | 18 | ns | IF = 10 0 mA | ||
| Pulse width distortion (Note 9) | | tpHLtpLH | | 50 | ns | IF = 0 10 mA | ||
| Propagation delay skew (Note 9) (device to device) (Note 10) | tpsk | -80 | 80 | IF = 0 10 mA | ||
| DESAT Sense to 90% Delay | tDESAT(90%) | 180 | 500 | CDESAT = 100 pF, Rg = 10 Cg = 25 nF, VCC2 = 30 V RF = 2.1 k | ||
| DESAT Sense to 10% Delay | tDESAT(10%) | 3.5 | 5 | s | ||
| DESAT Sense to Low Level FAULT Signal Delay | tDESA | |||||
2410121517_TOSHIBA-TLP5214-TP-E_C695256.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
