Transistor, Photovoltaic Output Optoisolators
-
photoelectric smoke detector ic microchip re46c191s16tf with two aa battery operation and internal oscillator
Microchip RE46C191: CMOS Low-Voltage Photoelectric Smoke Detector ASIC Product Overview The Microchip RE46C191 is a low-power, low-voltage CMOS photoelectric smoke detector Integrated Circuit (IC) designed for use in smoke detectors that comply with Underwriters Laboratory Specification UL217. With minimal external components, this circuit provides essential features for a photoelectric smoke detector, including local alarm memory, interconnect capability for up to 40
-
signal isolation MSKSEMI PC817C-MS photocoupler with GaAs infrared diode and NPN phototransistor
Product Overview The PC817x-MS is a series of high-reliability photocouplers designed for various industrial applications. It features a GaAs infrared emitting diode and an NPN silicon phototransistor, offering a minimum CTR of 50% under specified conditions. With an insulation voltage of 5,000Vrms and fast response times (typ. 6s rise, 5s fall), it is suitable for signal transmission and isolation in power supplies, meters, computers, and appliances. The series includes
-
High isolation voltage optocoupler MSKSEMI MPS2501L-1-L designed for smart meters and industrial control applications
Product Overview The MPS2501L-1-X is a controllable optocoupler designed for signal transmission between circuits, providing complete isolation between the front-end and the load. This isolation enhances safety, reduces circuit interference, and simplifies circuit design. Key features include a wide Current Transfer Ratio (CTR) range of 80-600%, high input-output isolation voltage of 5000 Vrms, and a collector-emitter breakdown voltage (BVCEO) of at least 80V. It is widely
-
Signal Isolation Optocoupler MSKSEMI MPS2501L-1-K for Industrial Control and Measurement Instruments
Product Overview The MPS2501L-1-X is a controllable optocoupler designed for signal transmission between circuits, providing complete isolation between the front-end and the load. This isolation enhances safety, reduces circuit interference, and simplifies circuit design. It is suitable for a wide range of applications including switching power supplies, smart meters, industrial control, measurement instruments, office equipment like copiers, and home appliances such as air
-
Surface mount optocoupler MSKSEMI MPS2701-1-K designed for automated assembly in smart meters and control systems
Product Overview The MPS2701-1-X is a compact surface-mount optocoupler designed for high-density applications. It comprises an infrared emitting diode and a phototransistor, offering a small form factor ideal for automated assembly. This device provides excellent input-output isolation and is suitable for various industrial and consumer electronics applications, including switching power supplies, smart meters, industrial control systems, office equipment, and home
-
High voltage isolation optocoupler MSKSEMI MFODM352 suitable for smart meters and home appliances including air conditioners
Product Overview The MFODM352 is a compact surface-mount optocoupler designed for easy surface-mount assembly. It integrates an infrared light-emitting diode (LED) made of gallium arsenide with a high-voltage phototransistor featuring an internal base-emitter resistor. This configuration achieves a high collector-emitter voltage (VCEO) exceeding 300V and an input-output isolation voltage of 3750Vrms. The MFODM352 is suitable for applications including switching power supplies
-
Surface mount optocoupler MSKSEMI MTLP181GB with small footprint and wide operating temperature range
Product Overview The MTLP181 is a compact surface-mount optocoupler designed for high-density surface-mount applications, such as programmable controllers. It comprises a gallium arsenide light-emitting diode and a phototransistor, offering a smaller footprint than DIP packages. Key features include a wide current transfer ratio (CTR) range, high input-output isolation voltage, and a robust operating temperature range. Product Attributes Brand: Msksemi Product Series: MTLP181
-
Four pin photocoupler MICRONE PC817C-Fe-DL suitable for smart meters home appliances and office equipment devices
Product OverviewThe PC817X is a four-pin photocoupler consisting of an infrared emitting diode and a phototransistor. Available in DIP, DIP-M, and SMD packages, it offers a current transfer ratio (CTR) ranging from 80% to 600% and high input-output isolation voltage (Viso=5000 V rms). This device is suitable for applications in switching power supplies, smart meters, industrial control, measurement instruments, office equipment like copiers, and home appliances such as air
-
High Isolation Linear Optocoupler Littelfuse LOC110P Designed For Process Control And Power Feedback
Product OverviewThe LOC110 Single Linear Optocoupler features an infrared LED optically coupled with two photodiodes. One feedback photodiode creates a control signal that servos the LED drive current, compensating for nonlinearities, while the other output photodiode provides a signal linear to the servo LED current. It offers wide bandwidth, high isolation, and excellent servo linearity, making it suitable for modem transformer replacement, digital telephone isolation,
-
High Reliability Optocoupler MSKSEMI PC817B-MS Featuring 5000Vrms Isolation and Fast Switching Times
Product Overview The PC817x-MS is a series of high-reliability optocouplers designed for various industrial applications. It features a GaAs infrared emitting diode coupled with an NPN silicon phototransistor, offering a minimum current transfer ratio (CTR) of 50% under specified operating conditions. With an isolation voltage of 5,000Vrms and fast response times (typ. 6s rise, 5s fall), these optocouplers are suitable for signal transmission and isolation in power supplies,
-
Robust embedded processing using MSKSEMI MPC357D microcontroller with comprehensive peripheral support
2504101957_MSKSEMI-MPC357D_C41383955.pdf
-
MSKSEMI MTLP521-1GB SOP optocoupler ideal for office equipment copiers and other electronic devices
Product Overview The MTLP521-1XX(DIP)/MTLP521-1XX(SOP) is a controllable optocoupler designed for signal transmission between circuits, providing complete isolation between the front-end and the load. This isolation enhances safety, reduces circuit interference, and simplifies circuit design. It is available in four-pin packages, in DIP-4 and SMD-4P forms. Key features include a current transfer ratio (CTR) ranging from 50% to 600% and an input-output isolation voltage of
