Logic Output Optoisolators
-
solid state relay photocoupler TOSHIBA TLP3083F D4 F with DIP6 package and reinforced insulation class
Product OverviewThe TLP3083 and TLP3083F are photocouplers featuring an infrared LED optically coupled to a zero-crossing photo triac. Designed for applications requiring solid-state relays, triac drivers, home electric appliances, and office equipment, these devices offer reinforced insulation class requirements with a guaranteed insulation thickness of 0.4 mm. They are available in DIP6 packages and are halogen-free.Product AttributesBrand: Toshiba Electronic Devices &
-
solid state relay component Orient OR MOC3052L S TA1 ideal for industrial motor control applications
Product Overview The Shenzhen Orient Components OR-MOC302X(L)/305X(L)/307X(L) series are high-isolation voltage photo couplers designed for interfacing logic systems with AC power control. Each device comprises a GaAs infrared emitting diode optically coupled to a monolithic silicon non-zero voltage crossing photo triac. They are ideal for applications requiring solid-state relays, industrial controls, motor control, solenoid actuation, and consumer appliance power switching.
-
Intelligent meter optocoupler NQUNXIN QXM3052-CuH-SE with GaAs infrared LED and silicon chip thyristor design
Product DescriptionThe QXM301X, QXM302X, and QXM305X series are optocouplers featuring a GaAs infrared light-emitting diode and a single-crystal silicon chip random phase photoelectric bidirectional thyristor. They are designed for applications such as switching power supplies, intelligent meters, industrial control, measuring instruments, office equipment (e.g., copiers), and household appliances (e.g., air conditioners, fans, water heaters).Product AttributesBrand: Qunxin (
-
Surface Mount Optocoupler OPTEK HCC242TX Gallium Aluminum Arsenide LED Silicon Phototransistor Device
OverviewThe HC240 and HC242 are optically coupled isolators designed for surface mounting. They consist of a Gallium Aluminum Arsenide LED and a silicon phototransistor housed in a miniature surface mount hermetic leadless chip carrier. These devices are ideal for applications where board space and device weight are critical design considerations. The HC240 and HC242 are identical except for their current transfer ratio.Product AttributesBrand: TT ElectronicsOrigin:
-
Orient OR-3H7B-TP-G- GK encapsulated 4 pin SOP photo coupler compliant with RoHS and REACH standards
Product OverviewThe OR-3H7-(GK) is a photo coupler from Shenzhen Orient Components Co., Ltd. It features high input-output isolation voltage (3,750Vrms) and a collector-emitter voltage of 80V. Designed for high-density installation on mixed PCB substrates, it is suitable for programmable controllers, system apparatus, and measuring instruments. The device is encapsulated in a 4-pin SOP, free of halogens and Sb2O3, and complies with RoHS and REACH standards.Product AttributesB
-
Orient OR MOC3063 photocoupler featuring 6 pin DIP zero cross triac driver output and halogen free construction
Product Overview The OR-306X series photocoupler is a 6-pin DIP zero-cross triac driver output device designed for reliable isolation between input and output, withstanding up to 5,000Vrms. It is compliant with EU REACH and RoHS standards. This series features an infrared light-emitting diode and a photodetector, free from halogens and Sb2O3. It is suitable for a wide range of applications including AC motor drives, AC motor starters, lighting controls, solenoid/valve
-
photocoupler component Orient ORPC-817SD-TP-F featuring GaAs emitter and NPN transistor for signal transmission
ORPC-817S Photocoupler The ORPC-817S is a photocoupler composed of a GaAs emitter and an NPN transistor. It offers a current conversion ratio (CTR) of a minimum of 50% under specific operating conditions (IF=5mA, VCE=5V), an insulation voltage of 5,000Vrms, and a typical response time of 4s. This component is designed for a wide range of applications including computers, instrumentation, reimbursement equipment, duplicating machines, vending machines, and household appliances
-
High speed photo coupler NQUNXIN QX6N137-CuH-D designed for ground loop elimination and data transmission in circuits
High Speed Photo Coupler QX6N137The QX6N137 optocoupler features a high-speed integrated photo-detector logic gate coupled to an 850nm AlGaAS LED, enabling rapid output. It offers a high bit rate of 10Mbit/s, high input-output isolation voltage (5000 Vrms), and operates within a wide temperature range of -40C to +85C. Designed with a logic gate output and strobable functionality, it meets reinforced insulation standards and safety certifications including UL 1577, VDE DIN
-
High voltage optically coupled isolator OPTEK JANTXV4N23A hermetically sealed TO78 package for industrial and medical
Hi-Reliability Optically Coupled Isolator This series of optically coupled isolators features an infrared emitting diode and a silicon phototransistor housed in a hermetically sealed TO-78 package. Designed for military and harsh environments, these devices offer high-voltage isolation between input and output, electrical isolation in dirty environments, and are suitable for industrial, medical, and office equipment. The suffix 'S' denotes that the collector is electrically
-
Zero crossing photo triac photocoupler TOSHIBA TLP3062A F in DIP6 package for office equipment and relays
Product OverviewThe TLP3062A and TLP3062AF are photocouplers featuring an infrared LED optically coupled to a zero-crossing photo triac. Housed in a DIP6 package, they offer a guaranteed insulation thickness of 0.4 mm (min), meeting reinforced insulation class requirements of international safety standards. These devices are suitable for applications such as solid-state relays, triac drivers, home electric appliances, and office equipment.Product AttributesBrand: ToshibaStart
-
Photo Coupler Device Orient OR-357C-S-TP-G Featuring Infrared LED and Photo Transistor Detector in SOP Package
Product Overview The OR-357 is a photo coupler featuring an infrared LED and a photo transistor detector encapsulated in a 4-pin SOP package with a 2.54mm pin pitch. It offers high input-output isolation voltage (VISO=3,750Vrms), high collector-emitter voltage (VCEO=80V), and a wide operating temperature range of -55 to 125. This device is suitable for hybrid substrates requiring high-density mounting, programmable controllers, and system appliances/measuring instruments.
-
Photo Darlington detector integrated photo coupler Orient ORPC-815S-F for signal isolation solutions
Product OverviewThe ORPC-815 series photo coupler features an infrared emitting diode optically coupled to a photo Darlington detector. It is available in a 4-pin DIP package with options for wide-lead spacing and SMD. This device offers high current transfer ratio, high input-output isolation voltage, and fast response times, making it suitable for signal transmission between circuits of different potentials and impedances, as well as in telephone sets, system appliances,
