Optocoupler UMW MOC3020M UMW series suitable for motor control and solenoid valve AC power switching
UMW MOC302x Series Optocouplers
The UMW MOC302x series are random-phase triac-driven optocouplers designed for AC power control applications. They consist of a GaAs infrared light-emitting diode coupled with a single-crystal silicon random-phase photoelectric bidirectional thyristor. These devices offer high isolation voltage and are suitable for various applications including solenoid valve control, ballast control, static AC power switches, and motor control.
Product Attributes
- Brand: UMW
- Certifications: UL approved: UL1577, file No.E547318
Technical Specifications
| Parameter | Symbol | UMW MOC302x (DIP-6/SOP-6) | Unit | Conditions |
| Peak breakdown voltage | VDRM | 400 | V | |
| High isolation voltage | VISO | 5000 | Vrms | |
| Operating Temperature | TOPR | -55 to 110 | C | |
| Storage Temperature | TSTG | -55 to 125 | C | |
| Soldering Temperature | TSOL | 260 | C | 10s |
| Input Forward Current | IF | 60 | mA | |
| Input Backward Voltage | VR | 6 | V | |
| Input Power Dissipation | PTOT | 100 | mW | |
| Input Power dissipation Derating factor | 1 | mW/C | above Ta=85C | |
| Output Off-state output terminal voltage | VDRM | 400 | V | |
| Output Peak repetitive surge current | ITSM | 3.8 | A | pw=100s,120pps |
| Output On-state current (RMS) | IT(RMS) | 1 | A | |
| Output Power Dissipation | PTOT | 300 | mW | |
| Output Power dissipation Derating factor | 7.4 | mW/C | above Ta=85C | |
| Input Forward Voltage | VF | 1.18 (Typ) | V | IF=20mA |
| Input Back current | IR | 100 (Typ) | A | VR=6V |
| Output Off-state peak current | IDRM | 250 (Typ) | nA | VDRM=Rated VDRM, IF=0mA |
| Output On-state peak voltage | VTM | 1.5 (Typ) | V | ITM=100mA peak |
| Critical rise rate of off-state voltage | dv/dt | 10 (Typ) | V/s | VPEAK=Rated VDRM, IF=0 |
| Maintain current | IH | 100 (Typ) | mA | Main terminal Voltage =3V |
| LED trigger current | IFT | 2.5 (Typ) / 30 (Max) | mA | UMW MOC3020 |
| LED trigger current | IFT | 15 (Typ) / 100 (Max) | mA | UMW MOC3021 |
| LED trigger current | IFT | 5 (Typ) | mA | UMW MOC3022 |
| LED trigger current | IFT | 10 (Typ) | mA | UMW MOC3023 |
Applications
- Solenoid valve control
- Ballast
- Static AC power switch
- Incandescent lamp dimmer
- Microprocessor peripheral interface
- Temperature control
- Motor control
- 115-240VAC
2512241909_UMW-MOC3020M-UMW_C5158042.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
