TOSHIBA TLP5214A D4 E IGBT gate driver photocoupler in SO16L package with long creepage and clearance
Key Attributes
Model Number:
TLP5214A(D4,E
Product Custom Attributes
Data Rate:
-
Operating Temperature:
-40℃~+110℃
Propagation Delay(tpd):
150ns;150ns
Input Threshold Current:
6mA
Isolation Voltage(Vrms):
5kV
Voltage - Supply:
15V~30V
Voltage - Forward(Vf):
1.7V
CMTI(kV/us):
35kV/us
Number Of Channels:
2
Input Type:
DC
Mfr. Part #:
TLP5214A(D4,E
Package:
SOIC-16-300mil
Product Description
Product Overview
The TLP5214A is a highly integrated 4.0 A output current IGBT gate drive photocoupler housed in a long creepage and clearance SO16L package. This smart gate driver photocoupler includes functions of IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping, and under voltage lockout (UVLO). It features desaturation leading edge blanking time, filtering time, and optimized soft-shutdown performance for secure operation. Suitable for driving IGBT and power MOSFET in inverter applications, it consists of two infrared LEDs and two high-gain, high-speed ICs for high current, high-speed output control and fault status feedback.
Product Attributes
- Brand: TOSHIBA
- Model: TLP5214A
- Certifications: UL-recognized (UL 1577, File No.E67349), cUL-recognized (CSA Component Acceptance Service No. 5A, File No.E67349), VDE approved (EN 60747-5-5, EN 62368-1)
Technical Specifications
| Characteristic | Symbol | Min | Typ. | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | ||||||
| LED Input forward current | IF | 25 | mA | |||
| Input forward current derating (Ta 95C) | IF/Ta | -1 | mA/C | |||
| Peak transient input forward current | IFPT | 1 | A | Pulse width PW 1 s, 300 pps | ||
| Peak transient input forward current derating (Ta 95C) | IFPT/Ta | -25 | mA/C | |||
| Reverse input voltage | VR | 6 | V | |||
| Input power dissipation | PD | 145 | mW | |||
| Input power dissipation derating (Ta 95C) | PD /Ta | -5.0 | mW/C | |||
| Detector Positive input supply voltage | VCC1 | -0.5 | 7 | V | ||
| H peak output current | IOPH | -4.0 | A | Ta = -40 to 110 C | ||
| L peak output current | IOPL | +4.0 | A | Ta = -40 to 110 C | ||
| FAULT output current | IFAULT | 8 | mA | |||
| FAULT pin voltage | VFAULT | -0.5 | VCC1 | V | ||
| Total output supply voltage (VCC2-VEE) | -0.5 | 35 | V | |||
| Negative output supply voltage (VE-VEE) | -0.5 | 15 | V | |||
| Positive output supply voltage (VCC2-VE) | -0.5 | 35 - (VE-VEE) | V | |||
| Output voltage | VO | -0.5 | VCC2 | V | ||
| Peak clamping sinking current | IClamp | 1.7 | A | |||
| Miller clamping pin voltage | VClamp | -0.5 | VCC2 | V | ||
| DESAT voltage | VDESAT | VE | VE + 10 | V | ||
| Output power dissipation | PO | 410 | mW | |||
| Output power dissipation derating (Ta 95C) | PO /Ta | -14.0 | mW/C | |||
| Operating temperature range | Topr | -40 | 110 | C | ||
| Storage temperature range | Tstg | -55 | 125 | C | ||
| Lead soldering temperature (10 s) | Tsol | 260 | C | For the effective lead soldering area. | ||
| Isolation voltage (AC, 60 s, R.H. 60%) | BVS | 5000 | Vrms | Considered a two-terminal device. | ||
| Recommended Operating Conditions | ||||||
| Total output supply voltage (Note 1) | (VCC2-VEE) | 15 | 30 | V | VCC2 rise slope under 3.0 V / s. | |
| Negative output supply voltage | (VE-VEE) | 0 | 15 | V | ||
| Positive output supply voltage | (VCC2-VE) | 15 - (VE-VEE) | 30 - (VE-VEE) | V | ||
| Positive input supply voltage | VCC1 | 3.3 | 5.5 | V | ||
| Input on-state current (Note 2) | IF(ON) | 7.5 | 10 | mA | Input signal rise time (fall time) 0.5 s. | |
| Input off-state voltage | VF(OFF) | 0 | 0.8 | V | ||
| Operating frequency (Note 3) | f | 50 | kHz | Exponential waveform. IOPH -4.0 A ( 90 ns), IOPL 4.0 A ( 90 ns), Ta = 110 C | ||
| Electrical Characteristics | ||||||
| Input forward voltage | VF | 1.4 | 1.7 | V | IF = 10 mA, Ta = 25C | |
| Input reverse current | IR | 10 | A | VR = 5 V | ||
| Input capacitance | Ct | 95 | pF | V = 0 V, f = 1 MHz, Ta = 25 C | ||
| FAULT low level output voltage | VFAULTL | 0.2 | 0.4 | V | IFAULT = 1.1 mA, VCC1 = 5.5 V / 3.3 V | |
| FAULT high level output current | IFAULTH | 0.5 | A | VFAULT = 5.5 V, VCC1 = 5.5 V / 3.3 V, Ta = 25 C | ||
| High level output current (Note 1) | IOPH | -1.2 | -4.0 | A | VO = VCC2 - 4 V | |
| Low level output current (Note 1) | IOPL | 3.5 | 5.5 | A | VO = VEE + 2.5 V / VEE + 7 V | |
| Low level output current during fault condition | IOLF | 90 | 150 | 230 | mA | VO - VEE = 14 V |
| High level output voltage | VOH | VCC2-0.3 | VCC2-0.1 | V | IO = -100 mA | |
| Low level output voltage | VOL | 0.1 | 0.2 | V | IO = 100 mA | |
| Clamp pin threshold voltage | VtClamp | 2.5 | V | |||
| Clamp low level sinking current | ICL | 0.56 | 1.8 | A | VO = VEE + 2.5 V | |
| High level supply current | ICC2H | 2.4 | 3.8 | mA | IO = 0 mA | |
| Low level supply current | ICC2L | 2.3 | 3.8 | mA | IO = 0 mA | |
| Blanking capacitor charging current | ICHG | -0.33 | -0.24 | -0.13 | VDESAT = 2 V | |
| Blanking capacitor discharge current | IDSCHG | 10 | 49 | VDESAT = 7 V | ||
| DESAT threshold voltage | VDESAT | 5.9 | 6.5 | 7.5 | V | VCC2 - VE VUVLO- |
| UVLO threshold voltage (Upper) | VUVLO+ | 10.5 | 11.6 | 13.5 | V | VO 5 V |
| UVLO threshold voltage (Lower) | VUVLO- | 9.2 | 10.3 | 11.1 | V | VO 5 V |
| UVLO hysteresis | UVLOHYS | 1.3 | ||||
| Threshold input current (L/H) | IFLH | 2.6 | 6 | mA | VCC2 = 30 V, VO < 5 V | |
| Threshold input voltage (H/L) | VFHL | 0.8 | V | VCC2 = 30 V, VO > 5 V | ||
| Isolation Characteristics | ||||||
| Capacitance input to output | CS | 1.0 | pF | Vs = 0 V, f = 1 MHz | ||
| Isolation resistance | RS | 1012 | 1014 | R.H. 60 %, VS = 500 V | ||
| Isolation voltage | BVS | 5000 | Vrms | AC, 60 s | ||
| Switching Characteristics | ||||||
| Propagation delay time (L H) | tpLH | 50 | 85 | 150 | ns | Rg = 10 , Cg = 25 nF, VCC2 = 30 V, IF = 0 10 mA |
| Propagation delay time (H L) | tpHL | 50 | 90 | 150 | ns | IF = 10 0 mA |
| Output rise time (10-90 %) | tr | 32 | IF = 0 10 mA | |||
| Output fall time (90-10 %) | tf | 18 | IF = 10 0 mA | |||
| Pulse width distortion | | tpHL-tpLH | | 50 | IF = 0 10 mA | |||
2412091034_TOSHIBA-TLP5214A-D4-E_C17575554.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
