TOSHIBA TLP5754 D4 TP4 E photocoupler with rail to rail output and high common mode transient immunity
Key Attributes
Model Number:
TLP5754(D4-TP4,E
Product Custom Attributes
Power Dissipation:
-
Output Current:
4A
Operating Temperature:
-40℃~+110℃
Isolation Voltage(Vrms):
5kV
Propagation Delay(tpd):
150ns;150ns
Reverse Voltage:
5V
Load Type:
MOSFET;IGBT
Rise Time:
15ns
Voltage - Supply:
15V~30V
Fall Time:
8ns
Voltage - Forward(Vf):
1.55V
CMTI(kV/us):
35kV/us
Number Of Channels:
1
Mfr. Part #:
TLP5754(D4-TP4,E
Package:
SO-6L
Product Description
Product Overview
The TLP5754 is a photocoupler featuring an infrared LED and a high-gain, high-speed photodetector in a compact 6-pin SO6L package, offering a 50% size reduction compared to 8-pin DIP packages. It meets reinforced insulation class requirements for international safety standards, enabling smaller equipment designs. The internal Faraday shield provides a high common-mode transient immunity of 35 kV/s. With a rail-to-rail output, it ensures stable operation and improved switching performance.
Product Attributes
- Brand: Toshiba
- Start of Commercial Production: 2014-06
- Certifications: UL-recognized (UL 1577), cUL-recognized (CSA Component Acceptance Service), VDE-approved (EN 60747-5-5, EN 62368-1), CQC-approved (GB4943.1, GB8898)
- Origin: Japan and Thailand Factory
Technical Specifications
| Characteristic | Symbol | Min | Typ. | Max | Unit | Note |
| Features | ||||||
| Buffer logic type | (1) Buffer logic type (totem pole output) | |||||
| Output peak current | 4.0 | A | (2) | |||
| Operating temperature | Topr | -40 | 110 | (3) | ||
| Supply current | 3.0 | mA | (4) | |||
| Supply voltage | VCC | 15 | 30 | V | (5) | |
| Threshold input current | 4 | mA | (6) | |||
| Propagation delay time | tpHL/tpLH | 150 | ns | (7) | ||
| Common-mode transient immunity | 35 | kV/s | (8) | |||
| Isolation voltage | BVS | 5000 | Vrms | (9) | ||
| Absolute Maximum Ratings | ||||||
| Input forward current | IF | 20 | mA | (Ta 105 ) | ||
| Peak transient input forward current | IFPT | 1 | A | (PW 1 s, 300 pps) | ||
| Input reverse voltage | VR | 5 | V | |||
| Input power dissipation | PD | 40 | mW | (Ta 85 ) | ||
| Junction temperature | Tj | 125 | ||||
| Peak high-level output current | IOPH | -4.0 | A | |||
| Peak low-level output current | IOPL | +4.0 | A | |||
| Output voltage | VO | 35 | V | |||
| Supply voltage | VCC | 35 | V | |||
| Output power dissipation | PO | 450 | mW | (Ta 85 ) | ||
| Junction temperature | Tj | 125 | ||||
| Operating temperature | Topr | -40 | 110 | |||
| Storage temperature | Tstg | -55 | 125 | |||
| Isolation voltage | BVS | 5000 | Vrms | AC, 60 s | ||
| Recommended Operating Conditions | ||||||
| Input on-state current | IF(ON) | 6 | 15 | mA | (Note 1) | |
| Input off-state voltage | VF(OFF) | 0 | 0.8 | V | (Note 2) | |
| Supply voltage | VCC | 15 | 30 | V | ||
| Peak high-level output current | IOPH | -4.0 | A | (Note 3) | ||
| Peak low-level output current | IOPL | +4.0 | A | (Note 3) | ||
| Operating frequency | f | 50 | kHz | |||
| Electrical Characteristics | ||||||
| Input forward voltage | VF | 1.45 | 1.55 | 1.70 | V | IF = 10 mA, Ta = 25 |
| Input forward voltage temperature coefficient | VF/Ta | -1.8 | mV/ | IF = 10 mA | ||
| Input reverse current | IR | 10 | A | VR = 5 V, Ta = 25 | ||
| Input capacitance | Ct | 60 | pF | V = 0 V, f = 1 MHz, Ta = 25 | ||
| Peak high-level output current | IOPH | -1.2 | A | IF = 5 mA, VCC = 30 V | ||
| Peak low-level output current | IOPL | -3.0 | A | IF = 5 mA, VCC = 15 V | ||
| High-level output voltage | VOH | 1.2 | V | IF = 0 mA, VCC = 30 V, VO = Open | ||
| Low-level output voltage | VOL | 0.07 | 0.2 | V | IF = 4 mA, VCC = 15 V, IO = -100 mA | |
| High-level supply current | ICCH | 14.7 | 14.9 | mA | VF = 0.8 V, VCC = 15 V, IO = 100 mA | |
| Low-level supply current | ICCL | 1.8 | 3.0 | mA | IF = 10 mA, VCC = 30 V, VO = Open | |
| Threshold input current (L/H) | IFLH | 1.7 | 3.0 | mA | VCC = 15 V, VO > 1 V | |
| Threshold input voltage (H/L) | VFHL | 1.4 | V | VCC = 15 V, VO < 1 V | ||
| Supply voltage UVLO threshold voltage | VUVLO+ | 12.7 | 13.5 | V | IF = 5 mA, VO > 2.5 V | |
| Supply voltage UVLO hysteresis | UVLOHYS | 0.8 | 1.0 | V | IF = 5 mA, VO < 2.5 V | |
| Isolation Characteristics | ||||||
| Total capacitance (input to output) | CS | 1.0 | pF | VS = 0 V, f = 1 MHz | ||
| Isolation resistance | RS | 1012 | 1014 | VS = 500 V, R.H. 60 % | ||
| Isolation voltage | BVS | 5000 | Vrms | AC, 60 s | ||
| Switching Characteristics | ||||||
| Propagation delay time (L/H) | tpLH | 150 | ns | IF = 0 10 mA, VCC = 30 V | ||
| Propagation delay time (H/L) | tpHL | 150 | ns | IF = 10 0 mA, VCC = 30 V | ||
| Rise time | tr | 150 | ns | IF = 0 10 mA, VCC = 30 V | ||
| Fall time | tf | 150 | ns | IF = 10 0 mA, VCC = 30 V | ||
| Pulse width distortion | |tpHL-tpLH| | 150 | ns | |||
| Propagation delay skew (device to device) | tpsk | 150 | ns | |||
| High-level common-mode transient immunity | CMH | 35 | kV/s | |||
| Low-level common-mode transient immunity | CML | 35 | kV/s | |||
2411220436_TOSHIBA-TLP5754-D4-TP4-E_C38846771.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
