Optocoupler RENESAS PS8352AL2-E3-AX Featuring Double Protection and Reinforced Insulation for Current Sensing
Key Attributes
Model Number:
PS8352AL2-E3-AX
Product Custom Attributes
Fall Time:
3.1us
Rise Time:
3.1us
Output Current:
20mA
Operating Temperature:
-40℃~+110℃
Load Voltage:
-
Reverse Voltage:
-
Load Type:
-
Current Transfer Ratio:
-;-
Forward Current(If):
-
Input Type:
DC
Isolation Voltage(Vrms):
5kV
Pd - Power Dissipation:
-
Number Of Channels:
1
Mfr. Part #:
PS8352AL2-E3-AX
Package:
SOIC-8
Product Description
Product Overview
The PS8352AL2 is an optically coupled isolation amplifier designed for high common mode transient immunity (CMTI) and high linearity. It utilizes a high-accuracy sigma-delta A/D converter and an AlGaAs light-emitting diode on the input, and a high-accuracy D/A converter on the output. This device is ideal for current and voltage sensing applications in AC servo, inverters, solar power conditioners, and measurement equipment.
Product Attributes
- Brand: Renesas Electronics (implied by datasheet R08DS0132EJ0101)
- Certifications: UL approved (UL1577, Double protection), CSA approved (CAN/CSA-C22.2 62368-1, Reinforced insulation), VDE approved (DIN EN 60747-5-5, Option)
- Material: Pb-Free product
- Package Type: 8-pin DIP lead bending type for long creepage distance for surface mount (L2)
- Embossed Tape Product: PS8352AL2-E3 (2 000 pcs/reel)
Technical Specifications
| Parameter | Symbol | Conditions | MIN. | TYP. | MAX. | Unit |
| ABSOLUTE MAXIMUM RATINGS | ||||||
| Operating Ambient Temperature | TA | -40 | +110 | °C | ||
| Storage Temperature | Tstg | -55 | +125 | °C | ||
| Supply Voltage | VDD1, VDD2 | 0 | 5.5 | V | ||
| Input Voltage | VIN+, VIN- | -2 | VDD1 +0.5 | V | ||
| 2 Seconds Transient Input Voltage | VIN+, VIN- | -6 | VDD1 +0.5 | V | ||
| Output Voltage | VOUT+, VOUT- | -0.5 | VDD2 +0.5 | V | ||
| Isolation Voltage | BV | AC voltage for 1 minute at TA = 25 °C , RH = 60 % between input and output. Pins 1-4 shorted together, 5-8 shorted together. | 5000 | Vr.m.s. | ||
| RECOMMENDED OPERATING CONDITIONS | ||||||
| Operating Ambient Temperature | TA | -40 | 110 | °C | ||
| Supply Voltage | VDD1, VDD2 | 4.5 | 5.5 | V | ||
| Input Voltage (Accurate and Linear) | VIN+, VIN- | *1 | -200 | 200 | mV | |
| ELECTRICAL CHARACTERISTICS (DC Characteristics) | ||||||
| Input Offset Voltage | Vos | TA = 25 °C | -0.25 | mV | ||
| Input Offset Voltage | Vos | -3 | 3 | mV | ||
| Input Offset Voltage Drift vs. Temperature | |dVos/dTA| | 1.6 | 10 | µV/°C | ||
| Gain | G | *1 200 mV ≤ VIN+ ≤ 200 mV, TA = 25 °C | 7.92 | 8 | 8.08 | V/V |
| Gain Drift vs. Temperature | |dG/dTA| | 0.0006 | V/V°C | |||
| VOUT Non-linearity (200 mV) | NL200 | *2 -200 mV ≤ VIN+ ≤ 200 mV | 0.014 | 0.35 | % | |
| VOUT Non-linearity (100 mV) | NL100 | *2 -100 mV ≤ VIN+ ≤ 100 mV | 0.011 | 0.2 | % | |
| Maximum Input Voltage before VOUT Clipping | |VIN+|MAX. | 320 | mV | |||
| Input Supply Current | IDD1 | VIN+ = 400 mV | 13.5 | 16 | mA | |
| Output Supply Current | IDD2 | VIN+ = -400 mV | 7.8 | 16 | mA | |
| Input Bias Current | IIN+ | VIN+ = 0V | -0.65 | µA | ||
| Low Level Saturated Output Voltage | VOL | VIN+ = -400 mV | 1.29 | V | ||
| High Level Saturated Output Voltage | VOH | VIN+ = 400 mV | 3.8 | V | ||
| Output Voltage (VIN+ = VIN- = 0 V) | VOCM | VIN+ = VIN- = 0 V | 2.5 | 2.8 | V | |
| Output Short-circuit Current | |IOSC| | 20 | mA | |||
| Equivalent Input Resistance | RIN | 450 | kΩ | |||
| VOUT Output Resistance | ROUT | 4 | Ω | |||
| Input DC Common-Mode Rejection Ratio | CMRRIN | *3 | 76 | dB | ||
| ELECTRICAL CHARACTERISTICS (AC Characteristics) | ||||||
| VOUT Bandwidth (-3 dB) | fC | VIN+ = 200 mVp-p, sine wave | 50 | 100 | kHz | |
| VOUT Noise | NOUT | VIN+ = 0 V | 15.6 | mVr.m.s. | ||
| VIN to VOUT Signal Delay (50 to 10%) | tPD10 | VIN+ = 0 to 150 mV step | 2.4 | 3.3 | µs | |
| VIN to VOUT Signal Delay (50 to 50%) | tPD50 | 4.2 | 5.6 | µs | ||
| VIN to VOUT Signal Delay (50 to 90%) | tPD90 | 6.1 | 9.9 | µs | ||
| VOUT Rise Time/Fall Time (10 to 90%) | tr/tf | VIN+ = 0 to 150 mV step | 3.1 | 6.6 | µs | |
| Common Mode Transient Immunity | CMTI | *1 VCM = 0.5 kV, tr = 20 ns, TA = 25 °C | 10 | 28 | kV/µs | |
| Power Supply Noise Rejection | PSR | *2 f = 1 MHz | 40 | mVr.m.s. | ||
2311160749_RENESAS-PS8352AL2-E3-AX_C17627007.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
