Triac driver output optoisolator 6 pin dip Orient OR MOC3021S TA1 compliant with EU REACH and RoHS standards
Product Overview
The MOC302X series is a range of 6-pin DIP optoisolators featuring a triac driver output, designed for applications requiring high isolation voltage (5,000Vrms). These devices contain an infrared light-emitting diode and a photodetector, are compliant with EU REACH standards, and meet RoHS requirements. They are suitable for controlling AC motor drives, AC motor starters, lighting controls, solenoid/valve controls, solid-state relays, and temperature controls, operating within a temperature range of -40C to +100C.
Product Attributes
- Brand: Orient
- Manufacturer: Shenzhen Orient Tech Ltd. Co., Ltd
- Product Line: MOC302X
- Certifications: EU REACH, RoHS compliant
- Package: 6-pin DIP
- Output Type: Triac Driver
- Construction: Halogen and Sb2O3 free
Technical Specifications
| Parameter | Symbol | Condition | Min | Typ. | Max | Unit |
|---|---|---|---|---|---|---|
| General Specifications | ||||||
| Isolation Voltage | Viso | AC Test, 1 minute, RH=40~60% | 5000 | Vrms | ||
| Operating Temperature | Topr | -40 | +100 | |||
| Storage Temperature | Tstg | -55 | +150 | |||
| Soldering Temperature | Tsol | Soldering time is 10 seconds | 260 | |||
| Input Specifications | ||||||
| Forward Current | IF | Normal Temperature (T=25) | 50 | mA | ||
| Junction Temperature | TJ | Normal Temperature (T=25) | 125 | |||
| Reverse Voltage | VR | Normal Temperature (T=25) | 6 | V | ||
| Power Dissipation | P | Normal Temperature (T=25) | 100 | mW | ||
| Forward Voltage | VF | IF=20mA | 1.2 | 1.6 | V | |
| Reverse Current | IR | VR=6V | 0.05 | 10 | A | |
| Output Specifications | ||||||
| Off-State Output Terminal Voltage | VDRM | Normal Temperature (T=25) | 400 | V | ||
| Peak Repetitive Surge Current | ITSM | PW=1ms, 120 pps, Normal Temperature (T=25) | 1 | A | ||
| Junction Temperature | TJ | Normal Temperature (T=25) | 125 | |||
| Collector Power Dissipation | PC | Normal Temperature (T=25) | 300 | mW | ||
| Total Power Dissipation | Ptot | Normal Temperature (T=25) | 330 | mW | ||
| Peak Blocking Current, Either Direction | IDRM | VDRM = 400V, Normal Temperature (T=25) | 10 | 100 | nA | |
| Peak On-State Voltage, Either Direction | VTM | ITM=100mA, Normal Temperature (T=25) | 1.7 | 3.0 | V | |
| Critical Rate of Rise of Off-State Voltage | dv/dt | Vin=240Vrms | 1000 | V/us | ||
| LED Trigger Current (IFT) | ||||||
| MOC3020 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 30 | mA | ||
| MOC3021 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 15 | mA | ||
| MOC3022 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 10 | mA | ||
| MOC3023 | IFT | Main Terminal Voltage = 3V, Normal Temperature (T=25) | 5 | mA | ||
| Holding Current, Either Direction | IH | Normal Temperature (T=25) | 200 | A | ||
Naming Rule
The naming convention for MOC302X series is as follows:
- Manufacturer Name: OR represents Shenzhen Orient Components Co., Ltd.
- Rank Code (X): Indicates the LED trigger current rank (0, 1, 2, 3). X=0 for MOC3020, X=1 for MOC3021, X=2 for MOC3022, X=3 for MOC3023.
- Week Code: Represents the manufacturing week (e.g., 01 for the first week).
- Year Code: Represents the manufacturing year (e.g., 8 for 2018).
- Anode: Indicates the positive terminal.
- Device Part Number: MOC302X photocoupler product.
Outer Dimensions
Refer to diagrams for MOC302X, MOC302XM, and MOC302XS series outer dimensions.
Taping Dimensions
Taping dimensions are provided for MOC302XS-TA and MOC302XS-TA1 series, with a tape width (W) of 160.3 mm and a pitch of 120.1 mm. Each reel contains 1000 units.
Soldering Temperature Profile
Recommended soldering profiles are provided for:
- IR Reflow Soldering (JEDEC-STD-020C compliant): Preheat (TSmin 150C, TSmax 200C, TS 9030 sec), Soldering Zone (TL 217C, tL 60 sec), Peak Temperature 260C. Ramp-up rate max 3C/sec, Ramp-down rate 3~6C/sec. Maximum three soldering times recommended.
- Wave Soldering (JEDEC22A111 compliant): Temperature 260+0/-5C for 10 sec. Preheat temperature 5 to 140C for 30 to 80 sec. Single soldering recommended.
- Hand Soldering by Soldering Iron: Temperature 380+0/-5C for max 3 sec per lead. Single soldering recommended.
Recommended Footprint Patterns
Refer to diagrams for recommended PCB land patterns.
Characteristics Curve
Refer to diagrams for characteristic curves.
2410121441_Orient-OR-MOC3021S-TA1_C370899.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
