Triac driver output photocoupler Orient OR MOC3021 6 pin DIP package compliant with EU REACH and RoHS directives
Key Attributes
Model Number:
OR-MOC3021
Product Custom Attributes
Number Of Channels:
1
Power Dissipation:
330mW
Operating Temperature:
-40℃~+100℃
Static Dv/dt:
1000V/us
Output Current(It(rms)):
-
Isolation Voltage(Vrms):
5kV
Forward Current:
50mA
Load Voltage:
400V
Current - Surge(Itsm):
1A
Output Type:
TRIAC
Voltage - Forward(Vf):
1.2V
Number Of Terminals:
6
Zero Crossing Circuit:
No
Holding Current (Ih):
0.2mA
Mfr. Part #:
OR-MOC3021
Package:
DIP-6
Product Description
Product Overview
The MOC302X series are 6-pin DIP optoisolators featuring a triac driver output. Designed for reliable isolation between input and output, these photocouplers offer an isolation voltage of 5,000Vrms. They are compliant with EU REACH standards and RoHS requirements. The MOC302X series is suitable for a wide range of applications including AC motor drives, AC motor starters, lighting controls, solenoid/valve controls, solid-state relays, and temperature controls.
Product Attributes
- Brand: Shenzhen Orient Tech Ltd. Co., Ltd (Orient)
- Product Type: Photocoupler (Optoisolator)
- Certifications: Compliance with EU REACH, RoHS compliant
- Package: 6-pin DIP
Technical Specifications
| Parameter | Symbol | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| General Specifications | ||||||
| Isolation Voltage | Viso | AC Test, 1 minute, R.H. = 40~60% | 5000 | Vrms | ||
| Operating Temperature | Topr | -40 | +100 | |||
| Storage Temperature | Tstg | -55 | +150 | |||
| Soldering Temperature | Tsol | Soldering time is 10 seconds | 260 | |||
| Input Specifications | ||||||
| Forward Current | IF | Normal Temperature (T=25) | 50 | mA | ||
| Junction Temperature | TJ | Normal Temperature (T=25) | 125 | |||
| Reverse Voltage | VR | Normal Temperature (T=25) | 6 | V | ||
| Power Dissipation | P | Normal Temperature (T=25) | 100 | mW | ||
| Forward Voltage | VF | IF=20mA | 1.2 | 1.6 | V | |
| Reverse Current | IR | VR=6V | 0.05 | 10 | A | |
| Output Specifications | ||||||
| Off-State Output Terminal Voltage | VDRM | Normal Temperature (T=25) | 400 | V | ||
| Peak Repetitive Surge Current | ITSM | PW=1ms, 120 pps, Normal Temperature (T=25) | 1 | A | ||
| Junction Temperature | TJ | Normal Temperature (T=25) | 125 | |||
| Collector Power Dissipation | PC | Normal Temperature (T=25) | 300 | mW | ||
| Total Power Dissipation | Ptot | Normal Temperature (T=25) | 330 | mW | ||
| Peak Blocking Current, Either Direction | IDRM | VDRM = 400V | 10 | 100 | nA | |
| Peak On-State Voltage, Either Direction | VTM | ITM=100mA Peak | 1.7 | 3.0 | V | |
| Critical rate of Rise of Off-State Voltage | dv/dt | Vin=240Vrms | 1000 | V/us | ||
| LED Trigger Current, Current Required to Latch Output, Either Direction | IFT | Main Terminal Voltage = 3V | mA | |||
| MOC3020 | 30 | mA | ||||
| MOC3021 | 15 | mA | ||||
| MOC3022 | 10 | mA | ||||
| MOC3023 | 5 | mA | ||||
| Holding Current, Either Direction | IH | 200 | uA | |||
| Model Naming Rule | ||||||
| Manufacturer Name | OR | Represents Shenzhen Orient Components Co., Ltd. | ||||
| Rank Code (X in MOC302X) | X | 0, 1, 2, 3 for MOC3020, MOC3021, MOC3022, MOC3023 respectively. | ||||
| Week Code | 01 to 52 | |||||
| Year Code | e.g., 8 for 2018 | |||||
| Anode | Represents anode terminal. | |||||
| Device Part Number | MOC302X | Refers to the MOC302X photocoupler product. | ||||
Application Range
- AC Motor Drives
- AC Motor Starters
- Lighting Controls
- Solenoid/Valve Controls
- Solid State Relays
- Temperature Controls
Soldering Information
IR Reflow Soldering (JEDEC-STD-020C compliant)
- Preheat: Min TS: 150C, Max TS: 200C, Time (TS): 9030 sec
- Soldering Zone: Temperature (TL): 217C, Time (tL): 60 sec
- Peak Temperature: 260C
- Ramp-up rate: 3C / sec max.
- Ramp-down rate: 3~6C / sec
- Note: Recommended one reflow soldering. Do not solder more than three times.
Wave Soldering (JEDEC22A111 compliant)
- Temperature: 260+0/-5C
- Time: 10 sec
- Preheat temperature: 5 to 140C
- Preheat time: 30 to 80 sec
- Note: Recommended one-time soldering under the specified temperature conditions.
Hand Soldering by Soldering Iron
- Temperature: 380+0/-5C
- Time: 3 sec max
- Note: Single lead soldering is allowed per process. Recommended one-time soldering.
Package Dimensions
Refer to the provided diagrams for Outer Dimension (MOC302X, MOC302XM, MOC302XS) and Taping Dimensions (MOC302XS-TA, MOC302XS-TA1).
Recommended Footprint Patterns
Refer to the provided diagram for recommended pad layouts.
2410121441_Orient-OR-MOC3021_C370894.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
