Compact Surface Mount Optically Coupled Isolator OPTEK HCC242 with High Isolation Voltage and Performance
Surface Mount Optically Coupled Isolator, HCPL-240, HCPL-242
The HCPL-240 and HCPL-242 are optically coupled isolators, consisting of a Gallium Aluminum Arsenide LED and a silicon phototransistor mounted and coupled in a miniature surface mount hermetic leadless chip carrier. The HCPL-240 and HCPL-242 are identical except for the current transfer ratio. Electrical parameters are similar to the 4N22 and 4N24 registered devices. These solid-state couplers are ideal for designs where board space and device weight are important design considerations. Typical screening and lot acceptance tests are provided on page 13-4. The burn-in condition is Vs = 9V, P = 275mW, IF = 20-50mA (adjusted to achieve P). No HTR is performed on this device.
Product Attributes
- Brand: Agilent Electronics plc
- Origin: USA
- Certifications: MIL-STD-19500 and J5 equivalent levels or per S5000
Technical Specifications
| Parameter | Symbol | HCPL-240 | HCPL-242 | Units | Conditions | |
| Absolute Maximum Ratings (TA = 25C unless otherwise noted) | ||||||
| Input-to-Output Isolation Voltage | Viso | 1.0 kVac (1) | Vrms | Inputs shorted to outputs | ||
| Operating Temperature | Topr | -55 to +125 | C | |||
| Storage Temperature | Tstg | -65 to +150 | C | |||
| Soldering Temperature (vapor phase reflow for 30 sec.) | Tsolder | 215 | C | |||
| Soldering Temperature (heated collet for 5 sec.) | Tsolder | 260 | C | |||
| Input Diode | ||||||
| Forward Current | IF | 40 | mA | (65C below) | ||
| Reverse Voltage | VR | 2.0 | V | |||
| Power Dissipation | Pd | 60 | mW(2) | |||
| Output Phototransistor | ||||||
| Continuous Collector Current | IC | 50 | mA | |||
| Collector-Emitter Voltage | VCEO(3) | 30 | V | |||
| Emitter-Collector Voltage | VECO(4) | 5.0 | V | |||
| Power Dissipation | Pd | 300 | mW(5) | |||
| Electrical Characteristics (TA = 25C unless otherwise noted) | ||||||
| Input Diode | ||||||
| Forward Voltage | VF | 1.00 | 1.00 | V | IF = 10.0 mA, TA = 25C | |
| 0.70 | 0.70 | V | IF = 10.0 mA, TA = -55C | |||
| 1.00 | 1.00 | V | IF = 10.0 mA, TA = 100C | |||
| Reverse Current | IR | 100 | nA | VR = 2.0 V | ||
| Output Phototransistor | ||||||
| Collector-Emitter Breakdown Voltage | V(BR)CEO(3) | 30 | V | IC = 1.0 mA, IF = 0 | ||
| Emitter-Collector Breakdown Voltage | V(BR)ECO(4) | 5.0 | V | IC = 100 A, IF = 0 | ||
| Collector-Emitter Dark Current | IO(OFF) | 100 | nA | VCE = 20 V, IF = 0 | ||
| 100 | 100 | nA | VCE = 20 V, IF = 0, TA = 100C | |||
| Coupled | ||||||
| On-State Collector Current | IO(ON) | 0.15 | 0.40 | mA | VCE = 5.0 V, IF = 2.0 mA | |
| 2.5 | 10.0 | mA | VCE = 5.0 V, IF = 10.0 mA | |||
| 1.0 | 4.0 | mA | VCE = 5.0 V, IF = 10.0 mA, TA = -55C | |||
| 1.0 | 4.0 | mA | VCE = 5.0 V, IF = 10.0 mA, TA = 100C | |||
| Collector-Emitter Saturation Voltage | VCE(SAT) | 0.30 | 0.30 | V | IC = 2.5 mA, IF = 20.0 mA (HCPL-240) / IC = 10.0 mA, IF = 20.0 mA (HCPL-242) | |
| Isolation Resistance (Input to Output) | RISO | 1011 | VISO = 1000 V (1) | |||
| Isolation Capacitance (Input to Output) | CISO | 5.0 | pF | VISO = 0 V, f = 1.0 MHz(1) | ||
| Output Rise Time | tr | 15.0 | 20.0 | ns | VCE = 10.0 V, IF = 10.0 mA, RL = 100 | |
| Output Fall Time | tf | 15.0 | 20.0 | ns | VCE = 10.0 V, IF = 10.0 mA, RL = 100 | |
2411272212_OPTEK-HCC242_C17616522.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
