Zero Voltage Crossing Infrared Emitting Diode LITEON MOC3062 for Industrial Motor and Relay Control
Product Overview
The MOC3061, MOC3062, and MOC3063 devices are gallium arsenide infrared emitting diodes optically coupled to monolithic silicon detectors, functioning as Zero Voltage Crossing bilateral triac drivers. They are designed for interfacing logic systems with equipment powered by 115/240 Vac lines, simplifying the control of AC power in applications such as solid-state relays, industrial controls, motors, solenoids, and consumer appliances. Key advantages include zero voltage crossing, a typical dv/dt of 1500 V/s, and a guaranteed dv/dt of 600 V/s. Devices tested and marked per VDE 0884 requirements are available with the suffix "V".
Product Attributes
- Brand: Fairchild Semiconductor
- Certifications: VDE 0884 (optional)
Technical Specifications
| Characteristic | Symbol | MOC3061 | MOC3062 | MOC3063 | Unit | Notes |
| INFRARED EMITTING DIODE Reverse Voltage | VR | 6 | Volts | |||
| INFRARED EMITTING DIODE Forward Current Continuous | IF | 60 | mA | |||
| INFRARED EMITTING DIODE Total Power Dissipation @ TA = 25C | PD | 120 | mW | Derate above 25C: 1.41 mW/C | ||
| OUTPUT DRIVER OffState Output Terminal Voltage | VDRM | 600 | Volts Peak | |||
| OUTPUT DRIVER Repetitive Surge Current (PW = 100 s, 120 pps) | ITSM | 1 | A | |||
| OUTPUT DRIVER Total Power Dissipation @ TA = 25C | PD | 150 | mW | Derate above 25C: 1.76 mW/C | ||
| TOTAL DEVICE Isolation Surge Voltage (Peak ac Voltage, 60 Hz, 1 Second Duration) | VISO | 7500 | Vac(pk) | Internal device dielectric breakdown rating. Pins 1 & 2 common, Pins 4, 5 & 6 common. | ||
| TOTAL DEVICE Total Power Dissipation @ TA = 25C | PD | 250 | mW | Derate above 25C: 2.94 mW/C | ||
| TOTAL DEVICE Junction Temperature Range | TJ | 40 to +100 | C | |||
| TOTAL DEVICE Ambient Operating Temperature Range | TA | 40 to +85 | C | |||
| TOTAL DEVICE Storage Temperature Range | Tstg | 40 to +150 | C | |||
| TOTAL DEVICE Soldering Temperature (10 s) | TL | 260 | C | |||
| INPUT LED Reverse Leakage Current (VR = 6 V) | IR | 0.05 | A | Max: 100 A | ||
| INPUT LED Forward Voltage (IF = 30 mA) | VF | 1.3 | Volts | Max: 1.5 Volts | ||
| OUTPUT DETECTOR Leakage with LED Off, Either Direction (Rated VDRM(1)) | IDRM1 | 60 | nA | Max: 500 nA | ||
| OUTPUT DETECTOR Critical Rate of Rise of OffState Voltage | dv/dt | 600 | V/s | Typical: 1500 V/s | ||
| COUPLED LED Trigger Current | IFT | 15 | 10 | 5 | mA | Required to latch output (Main Terminal Voltage = 3 V). All devices guaranteed to trigger at IF max IFT. Recommended IF: max IFT to 60 mA. |
| COUPLED LED Peak OnState Voltage, Either Direction (ITM = 100 mA, IF = Rated IFT) | VTM | 1.8 | Volts | Max: 3 Volts | ||
| COUPLED LED Holding Current, Either Direction | IH | 250 | A | |||
| COUPLED LED Inhibit Voltage (MT1MT2 Voltage above which device will not trigger.) (IF = Rated IFT) | VINH | 5 | Volts | Max: 20 Volts | ||
| COUPLED LED Leakage in Inhibited State (IF = Rated IFT, Rated VDRM, Off State) | IDRM2 | 500 | A | |||
| COUPLED LED Isolation Voltage (f = 60 Hz, t = 1 sec) | VISO | 7500 | Vac(pk) | |||
2410121938_LITEON-MOC3062_C115473.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
