motor control optocoupler LITEON LTV-333J-TP1 with 5 amp output current and high temperature operation range
Product Overview
The LTV-333J series is an advanced, intelligent 5.0 A output current IGBT gate driver optocoupler designed for compact and affordable fault protection. It integrates VCE desaturation detection, under-voltage lockout (UVLO), soft IGBT turn-off, isolated open collector fault feedback, and active Miller clamping for enhanced design flexibility and circuit protection. Utilizing an AlGaAs LED optically coupled to an integrated circuit with a power output stage, it is ideal for driving power IGBTs and MOSFETs in motor control inverter applications, capable of directly driving IGBTs up to 1200 V and 150 A, or driving discrete power stages for higher-rated IGBTs. The optocoupler offers an insulation voltage of VIORM = 1414 VPEAK and guarantees operational parameters over a temperature range of -40C to +105C.
Product Attributes
- Brand: LITEON (implied by sales representative mention)
- Certifications: UL/ cUL Recognized (5000 VRMS/1 min), IEC/EN/DIN EN 60747-5-5 (VIORM = 1414 Vpeak)
- Material Group: IIIa
- MSL Level: 1
Technical Specifications
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition | Note |
| Electrical Characteristics | |||||||
| Input Forward Voltage | VF | 1.2 | 1.37 | 1.8 | V | IF = 10mA | |
| Input Forward Voltage Temperature Coefficient | VF/ T | -1.237 | mV/C | IF = 10mA | |||
| Input Reverse Voltage | VR | 5 | V | ||||
| Input Current (ON) | IFL(ON) | 8 | 12 | mA | |||
| Input Voltage (OFF) | VF(OFF) | -3.6(0) | 0.8 | V | |||
| Maximum Supply Current | ICC | 4.5 | mA | ||||
| Peak Output Current (Maximum) | IOH(PEAK) | 5 | A | 1 | |||
| Peak Output Current (Minimum) | IOL(PEAK) | 4.0 | A | 2 | |||
| Propagation Delay (Maximum) | 200 | ns | |||||
| Pulse Width Distortion (Maximum) | PWD | 100 | ns | ||||
| Common Mode Rejection (Minimum) | CMR | 50 | kV/us | VCM = 1500 V | |||
| Wide VCC Operating Range | VCC | 15 | 30 | Volts | |||
| Total Output Supply Voltage (VCC2-VEE) | 15 | 30 | V | ||||
| Negative Output Supply Voltage (VE-VEE) | 0(-0.5) | 15 | V | ||||
| Positive Output Supply Voltage (VCC2-VE) | 15(-0.5) | 30-(VE-VEE) | V | ||||
| Fault Output Current | IFAULT | 8 | mA | ||||
| Peak Clamping Sinking Current | IClamp | 1.7 | A | ||||
| Insulation Characteristics | |||||||
| Maximum Working Insulation Voltage | VIORM | 1414 | Vpeak | ||||
| Input-to-Output Test Voltage (Method b) | VPR | 2651 | Vpeak | tm = 1 sec, Partial Discharge < 5 pC | *a | ||
| Input-to-Output Test Voltage (Method a) | VPR | 2262 | Vpeak | tm = 10 sec, Partial Discharge < 5 pC | *a | ||
| Highest Allowable Overvoltage | VIOTM | 8000 | Vpeak | tini = 60 sec | |||
| Safety Limiting Values | |||||||
| Case Temperature | TS | 175 | C | ||||
| Input Current | IS, INPUT | 400 | mA | ||||
| Output Power | PS, OUTPUT | 1200 | mW | ||||
| Insulation Resistance | RS | 109 | TS, VIO = 500 V | ||||
| External Insulation | |||||||
| Minimum External Air Gap | L(101) | 8.3 | mm | ||||
| Minimum External Tracking | L(102) | 8.3 | mm | ||||
| Minimum Internal Plastic Gap | 0.5 | mm | |||||
| Tracking Resistance (CTI) | CTI | >175 | V | DIN IEC 112/VDE 0303 Part 1 | |||
2410121523_LITEON-LTV-333J-TP1_C2944032.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
