High reliability LITEON LTV-330J-TP1 intelligent gate driver suitable for discrete power stages and inverter
Key Attributes
Model Number:
LTV-330J-TP1
Product Custom Attributes
Rise Time:
50ns
Fall Time:
50ns
Output Current:
2.5A
Operating Temperature:
-40℃~+105℃
Reverse Voltage:
5V
Forward Current(If):
25mA
Input Type:
DC
Isolation Voltage(Vrms):
5kV
Pd - Power Dissipation:
150mW
Mfr. Part #:
LTV-330J-TP1
Package:
SMD
Product Description
Product Overview
The LTV-330J is an advanced 2.5 A output current, intelligent gate driver designed for IGBT VCE fault protection. It offers integrated VCE detection, under voltage lockout (UVLO), "soft" IGBT turn-off, isolated open collector fault feedback, and active Miller clamping for design flexibility and circuit protection. This optocoupler is ideal for driving power IGBTs and MOSFETs in motor control inverter applications, suitable for directly driving IGBTs up to 1200 V and 150 A, or for driving discrete power stages for higher-rated IGBTs. It operates within a temperature range of -40C to +105C with an insulation voltage of VIORM = 1414 VPEAK.
Product Attributes
- Brand: LITEON (implied by sales representative contact)
- Certifications: UL/cUL Recognized, IEC/EN/DIN EN 60747-5-5
- Material: Halogen free (mentioned in package dimensions notes)
- Origin: Not specified
- Color: Not specified
Technical Specifications
| Parameter | Symbol | Min | Max | Unit | Notes |
| Absolute Maximum Ratings | |||||
| Storage Temperature | Tstg | -55 | +125 | C | |
| Operating Temperature | Topr | -40 | +105 | C | |
| Output IC Junction Temperature | TJ | 125 | C | ||
| Average Forward Input Current | IF | 25 | mA | 3 | |
| Reverse Input Voltage | VR | 5 | V | ||
| Peak Transient Input Current | IF(TRAN) | 1 | A | 1 | |
| High Peak Output Current | IOH(PEAK) | 2.5 | A | 2 | |
| Low Peak Output Current | IOL(PEAK) | 2.5 | A | 2 | |
| Positive Input Supply Voltage | VCC1 | -0.5 | 7 | V | |
| FAULT Output Current | Ifault | 8 | mA | ||
| FAULT Pin Voltage | VFAULT | -0.5 | VCC1 | V | |
| Total Output Supply Voltage (VCC2 VEE) | -0.5 | 35 | V | ||
| Negative Output Supply Voltage (VE-VEE) | -0.5 | 15 | V | ||
| Positive Output Supply Voltage (VCC2 VE) | -0.5 | 30-(VE-VEE) | V | ||
| Output Voltage | VO(PEAK) | -0.5 | 35 | V | |
| Peak Clamping Sinking Current | IClamp | 1.7 | A | ||
| Miller Clamping Pin Voltage | VClamp | -0.5 | VCC2 | V | |
| DESAT Voltage | VDESAT | VE | VE+10 | V | |
| Power Dissipation | PI | 150 | mW | ||
| Output Power Dissipation | PO | 600 | mW | ||
| Lead Solder Temperature (10s) | Tsol | 260 | C | ||
| Recommended Operating Conditions | |||||
| Operating Temperature | TA | -40 | 105 | C | |
| Total Output Supply Voltage (VCC2-VEE) | 15 | 30 | V | ||
| Negative Output Supply Voltage (VE-VEE) | 0(-0.5) | 15 | V | ||
| Positive Output Supply Voltage (VCC2-VE) | 15(-0.5) | 30- (VE-VEE) | V | ||
| Input Current (ON) | IFL(ON) | 8 | 12 | mA | |
| Input Voltage (OFF) | VF(OFF) | -3.6(0) | 0.8 | V | |
| Features | |||||
| Maximum Peak Output Current | 2.5 | A | |||
| Maximum Propagation Delay | 200 | ns | |||
| Maximum Pulse Width Distortion (PWD) | 100 | ns | |||
| Minimum Common Mode Rejection (CMR) at VCM = 1500 V | 50 | kV/us | |||
| Maximum Supply Current | ICC | 4.5 | mA | ||
| Wide VCC Operating Range | VCC | 15 | 30 | Volts | |
| Guaranteed Performance over Temperature | -40 | +105 | C | ||
| MSL Level | 1 | ||||
| Insulation Voltage | VIORM | 1414 | Vpeak | ||
| IEC/EN/DIN EN 60747-5-5 Insulation Characteristics | |||||
| Maximum Working Insulation Voltage | VIORM | 1414 | Vpeak | ||
| Input-to-Output Test Voltage, Method b (Production Test) | VPR | 2651 | Vpeak | tm = 1 sec, Partial Discharge < 5 pC | |
| Input-to-Output Test Voltage, Method a (Type and Sample Test) | VPR | 2262 | Vpeak | tm = 10 sec, Partial Discharge < 5 pC | |
| Highest Allowable Overvoltage | VIOTM | 8000 | Vpeak | tini = 60 sec | |
| Insulation Resistance at TS, VIO = 500 V | RS | 109 | |||
| Insulation and Safety Related Specifications | |||||
| Minimum External Air Gap (External Clearance) | L(101) | 8.3 | mm | Measured from input terminals to output terminals, shortest distance through air. | |
| Minimum External Tracking (External Creepage) | L(102) | 8.3 | mm | Measured from input terminals to output terminals, shortest distance path along body. | |
| Minimum Internal Plastic Gap (Internal Clearance) | 0.5 | mm | Through insulation distance, conductor to conductor. | ||
| Tracking Resistance (Comparative Tracking Index) | CTI | >175 | V | DIN IEC 112/VDE 0303 Part 1 | |
| Material Group | IIIa | (DIN VDE 0110, 1/89, Table 1) | |||
2410121523_LITEON-LTV-330J-TP1_C2944029.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
