Intelligent power module interface optocoupler KTP HCPL-M456-C5H0 for inverter efficiency improvement
Key Attributes
Model Number:
HCPL-M456-C5H0
Product Custom Attributes
Power Dissipation:
145mW
Load Voltage:
30V
Output Current:
15mA
Low Level Delay Time:
550ns
High Level Delay Time:
400ns
Reverse Voltage:
5V
Current Transfer Ratio:
44%
Voltage - Forward(Vf):
1.5V
Voltage - Supply:
4.5V~30V
Forward Current(If):
25mA
Operating Temperature:
-40℃~+100℃
CMTI(kV/us):
30kV/us
Number Of Channels:
1
Input Threshold Current:
5mA
Isolation Voltage(Vrms):
3.75kV
Input Type:
DC
Mfr. Part #:
HCPL-M456-C5H0
Package:
SO-5
Product Description
HCPL-M456 Intelligent Power Module Interface Optocoupler
The HCPL-M456 is an intelligent power module interface optocoupler that uses a GaAsP LED optically coupled to a high-gain photodetector. Its minimal propagation delay difference makes it ideal for improving inverter efficiency by reducing switching dead-time in general IPM applications. It operates within an industrial temperature range of -40C to 100C.
Product Attributes
- Brand: KTP Semiconductor
- Model: HCPL-M456
- Origin: Derived from URL (ktp-semi.com)
Technical Specifications
| Parameter | Symbol | Min | Typical | Max | Unit | Test Condition |
|---|---|---|---|---|---|---|
| Electrical Characteristics (Unless otherwise specified, TA=-40C to +100C, VCC=4.5V to 30V, IF(on)=10mA to 20mA, VF(off)=-5V to 0.8V. Typical values are measured at TA=25, VCC=15V.) | ||||||
| Current Transfer Ratio | CTR | 44 | 90 | % | IF=10mA, VO=0.6V | |
| Low Level Output Current | IOL | 4.4 | 9.0 | mA | IF=10mA, VO=0.6V | |
| Low Level Output Voltage | VOL | 0.3 | 0.6 | V | IO=2.4mA | |
| Input Threshold Current | ITH | 1.5 | 5.0 | mA | VO=0.8V, IO=0.75mA | |
| High Level Output Current | IOH | 5 | 50 | uA | VF=0.8V | |
| High Level Supply Current | ICCH | 0.6 | 1.3 | mA | VF=0.8V, VO=Open | |
| Low Level Supply Current | ICCL | 0.6 | 1.3 | mA | IF=10mA, VO=Open | |
| Input Forward Voltage | VF | 1.5 | 1.8 | V | IF=10mA | |
| Forward Voltage Temp. Coefficient | VF/TA | -1.6 | mV/ | IF=10mA | ||
| Input Breakdown Voltage | BVR | 5 | V | IR=10uA | ||
| Input Capacitance | CIN | 60 | pF | f=1MHz, VF=0V | ||
| Switching Characteristics (RL=20K, Unless otherwise specified, TA=-40C to +100C, VCC=4.5V to 30V, IF(on)=10mA to 20mA, VF(off)=-5V to 0.8V. Typical values are measured at TA=25, VCC=15V.) | ||||||
| Low Level Output Delay Time | tPHL | 30 | 200 | 400 | ns | CL=100pF |
| High Level Output Delay Time | tPLH | 130 | 270 | 550 | ns | CL=100pF |
| Pulse Width Distortion | PWD | 200 | 450 | ns | ||
| Propagation Delay Difference (Any two paths) | tPLH-tPHL | -150 | 200 | 450 | ns | CL=100pF |
| High Level Output Common Mode Transient Rejection | CMH | 15 | 30 | kV/us | IF=0mA, VO3.0V | |
| Low Level Output Common Mode Transient Rejection | CML | 15 | 30 | kV/us | IF=10mA, VO1.0V | |
| Package Characteristics | ||||||
| Input-Output Isolation Breakdown Voltage | VISO | 3750 | Vrms | RH<50%, t=1min, TA=25C | ||
| Input-Output Resistance | RI-O | 1012 | VI-O=500Vdc | |||
| Input-Output Capacitance | CI-O | 0.6 | pF | f=1MHz | ||
| Maximum Ratings | ||||||
| Storage Temperature | TS | -55 | 125 | |||
| Operating Temperature | TA | -40 | 100 | |||
| Average Input Current | IF(AVG) | 25 | mA | |||
| Peak Input Current (50% duty cycle, 1us pulse width) | IF(PEAK) | 50 | mA | |||
| Transient Input Current (Pulse width <1us, 300pps) | IF(TRAN) | 1 | A | |||
| Reverse Input Voltage (Pin 3-1) | VR | 5 | V | |||
| Average Output Current (Pin 5) | IO(AVG) | 15 | mA | |||
| Output Voltage (Pin 5-4) | VO | -0.5 | 30 | V | ||
| Supply Voltage (Pin 6-4) | VCC | -0.5 | 30 | V | ||
| Output Dissipation Power | PO | 100 | mW | |||
| Total Dissipation Power | PT | 145 | mW | |||
| Recommended Operating Conditions | ||||||
| Supply Voltage | VCC | 4.5 | 30 | V | ||
| Output Voltage | VO | 0 | 30 | V | ||
| Forward Input Current (ON) | IF(ON) | 10 | 20 | mA | ||
| Forward Input Voltage (OFF) | VF(OFF) | -5 | 0.8 | V | ||
| Operating Temperature | TA | -40 | 100 | |||
Applications
- IPM Isolation
- IGBT/MOSFET Gate Isolation Drive
- AC and Brushless DC Motor Drives
- Industrial Inverters
Notes
Conventional electrostatic discharge (ESD) precautions are recommended when handling and assembling this device to prevent damage or degradation due to ESD.
2412021443_KTP-HCPL-M456-C5H0_C41379066.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
