86--13667332386
quality High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface factory
quality High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface factory

High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface

Key Attributes
Model Number: 6N137-500E-JSM
Product Custom Attributes
Output Current:
50mA
Low Level Delay Time:
100ns
High Level Delay Time:
100ns
Input Threshold Current:
15mA
Reverse Voltage:
5V
Voltage - Forward(Vf):
1.4V
Voltage - Supply:
4.5V~5.5V
Forward Current(If):
20mA
Operating Temperature:
-40℃~+85℃
CMTI(kV/us):
5kV/us
Isolation Voltage(Vrms):
5kV
Number Of Channels:
1
Input Type:
DC
Mfr. Part #:
6N137-500E-JSM
Package:
SOP-8
Product Description

High-Speed Optocoupler

This high-speed optocoupler consists of a high-intensity infrared light-emitting diode and a high-speed, high-gain photosensitive integrated circuit. It is designed for high-speed logic system isolation, offering features such as TTL/LSTTL compatibility, low input current, and a wide operating temperature range. It is an ideal replacement for pulse transformers and provides isolation for various interfaces including computer peripherals, microprocessor systems, A/D and D/A converters, switch-mode power supplies, instrument input/outputs, and motor driver high-side triode isolation. It also helps eliminate ground loop noise.

Applications:

  • Line receiver isolation
  • Computer-peripheral interface
  • Microprocessor system interface
  • Digital signal isolation for A/D, D/A conversion
  • Switching power supplies
  • Instrument input/output isolation
  • Elimination of ground loop noise
  • Replacement for pulse transformers
  • High-side triode isolation in motor drivers
  • Isolation of high-speed logic systems

Product Attributes:

  • Brand: JSMICRO Semiconductor
  • Compatible Models: 6N137, HCPL2601, HCPL2611
  • Speed: 10 MBd
  • TTL Compatibility: LSTTL/TTL compatible
  • Low Input Current: 7.5mA
  • Operating Temperature: -40C to +85C
  • Package Forms: 8-Pin DIP, 8-Pin SMD

Technical Specifications:

Parameter Symbol Min. Typ. Max. Unit Test Conditions
Absolute Maximum Ratings
Storage Temperature TS -55 125 C
Operating Temperature TA -40 85 C
Input Forward Current IF 20 mA
Input Reverse Voltage VR 5 V
Supply Voltage (Max 1 minute) VCC 7 V
Input Strobe Voltage VE VCC + 0.5 V (Not greater than VCC + 500mV)
Input Strobe Current IE 5 mA
Output Collector Current IO 50 mA
Output Collector Voltage VO 7 V
Output Collector Power Dissipation PO 85 mW
Recommended Operating Conditions
Input Current, Low Level IFL 0 250 A
Input Current, High Level IFH 7.5 15 mA
Supply Voltage VCC 4.5 5.5 V
Low Level Strobe Voltage VEL 0 0.8 V
High Level Strobe Voltage VEH 2.0 VCC V
Operating Temperature TA -40 85 C
Number of TTL Loads (with load on RL = 1 k) N 5
Output Pull-up Resistor RL 330 4 k
Electrical Characteristics (Operating Conditions: TA=-40C to +85C; Typical conditions: TA=25C, Vcc = 5 V)
High Level Output Current IOH 5.5 100 A VO=5.5V, IF=250A
Input Threshold Current ITH 3.0 5.0 mA VO=0.6V, IOL(Sinking)=13mA
Low Level Output Voltage VOL 0.35 0.6 V VCC=5.5V VE=2.0V IF=5mA, IOL(Sinking)=13mA
High Level Supply Current ICCH 7.0 10.0 mA IF = 0 mA
Low Level Supply Current ICCL 9.0 13.0 mA VE= 0.5V, VCC=5.5V IF = 10 mA
High Level Strobe Current IEH -0.7 -1.6 mA VCC= 5.5V, VE = 2.0 V
Low Level Strobe Current IEL -0.9 -1.6 mA VCC= 5.5V, VE = 0.5 V
High Level Strobe Voltage VEH 2.0 V
Low Level Strobe Voltage VEL 0.8 V
Input Forward Voltage VF 1.4 1.75 V IF = 10 mA
Input Reverse Voltage VR 5 V IR = 10 A
Switching Characteristics (AC) (Operating Conditions: TA=-40C to +85C, Vcc=5V, IF=7.5mA; Typical conditions: TA=25C, Vcc=5V)
High Level Output Delay Time tPLH 50 100 ns RL=350, CL=15pF
Low Level Output Delay Time tPHL 60 100 ns RL=350, CL=15pF
Pulse Width | tPHL -tPLH | 40 ns
Rise Time (10-90%) tr 30 ns RL = 350 , CL = 15 pF
Fall Time (90-10%) tf 10 ns RL = 350 , CL = 15 pF
Strobe Delay Time (VEH to VEL) tELH 30 ns VEL = 0 V, VEH = 3 V
Strobe Delay Time (VEL to VEH) tEHL ns
Isolation Characteristics (Typical conditions: TA=25C)
Input-Output Leakage Current II-O 1 A 45% RH, t = 5s, VI-O=3kV dc
Input-Output Isolation Voltage ISO 5000 V rms RH 50%, t = 1 min
Input-Output Isolation Resistance RI-O 1012 VI-O = 500 V dc
Input-Output Isolation Capacitance CI-O 0.6 pF f = 1 MHz
Common Mode Transient Suppression Ratio (Output Low Level) CMH 5000 10000 15000 V/S VCM=400Vp-p, IF = 7.5mA, RL=350, TA=25C
Common Mode Transient Suppression Ratio (Output High Level) CML 5000 10000 15000 V/S VCM=400Vp-p, IF = 0mA, RL=350, TA=25C

2409280002_JSMSEMI-6N137-500E-JSM_C17701731.pdf

Contact Our Experts And Get A Free Consultation!

Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.