Power electronics driver ISOCOM ICPL3120SMT/R with 2.5 amp peak output current and wide voltage range
Key Attributes
Model Number:
ICPL3120SMT/R
Product Custom Attributes
Power Dissipation:
295mW
Output Current:
2.5A
Operating Temperature:
-40℃~+105℃
Input Threshold Current:
5mA
Propagation Delay(tpd):
500ns;500ns
Isolation Voltage(Vrms):
5kV
Voltage - Supply:
15V~30V
Voltage - Forward(Vf):
1.8V
CMTI(kV/us):
50kV/us
Number Of Channels:
1
Input Type:
DC
Mfr. Part #:
ICPL3120SMT/R
Package:
SOP-8-2.54mm
Product Description
Product Overview
The ICPL3120 is an infrared light-emitting diode optically coupled to an integrated circuit with a power driving output. It is designed to drive Power IGBT and MOSFET devices in motor control inverters and power supplies. With a peak output current capability of 2.5A, it can directly drive IGBT/MOSFETs up to 1200V/100A ratings. For higher-rated IGBTs, the ICPL3120 can be used to drive a discrete power stage that controls the IGBT gate. Key features include high common mode rejection, wide operating voltage range, and under-voltage lock-out (UVLO) protection with hysteresis, ensuring reliable performance across a temperature range of -40C to +105C. This component is lead-free and RoHS compliant.
Product Attributes
- Brand: ISOCOM COMPONENTS
- Certifications: Lead Free and RoHS Compliant, Safety Approvals Pending
- MSL Rating: 1
Technical Specifications
| Parameter | Symbol | Test Condition | Min | Typ. | Max | Unit |
|---|---|---|---|---|---|---|
| ABSOLUTE MAXIMUM RATINGS (TA = 25C) | ||||||
| Input Forward Current | 20mA | |||||
| Forward Current Rise / Fall Time | 500ns | |||||
| Power dissipation | 45mW | |||||
| Reverse Voltage | VR | IR = 10A | 5V | |||
| Forward Peak Current (Pulse Width 1s, 300pps) | 1A | |||||
| Output Peak Output Current (Exponential waveform, Pulse Width 0.3s, f = 15kHz) | IO(Peak) | 2.5A | ||||
| Operating Frequency (Exponential waveform, IO(Peak) l2.5Al, Pulse Width 0.3s) | 50kHz | |||||
| Supply Voltage (VCC VEE) | 0V | 35V | ||||
| Output Voltage | VO | 0V | VCC | |||
| Power Dissipation | 250mW | |||||
| Isolation Voltage | VISO | t = 1 min, R.H. = 40% - 60%, TA = 25C | 5000VRMS | |||
| Total Power Dissipation | 295mW | |||||
| Operating Temperature | TA | -40 | 105 | C | ||
| Storage Temperature | -55 | 125 | C | |||
| Lead Soldering Temperature (10s) | 260C | |||||
| Total Package Junction Temperature | 125C | Max | ||||
| Recommended Operating Conditions | ||||||
| Operating Temperature | TA | -40 | 105 | C | ||
| Supply Voltage | VCC VEE | 15 | 30 | V | ||
| Input Current (ON) | IF(ON) | 7 | 16 | mA | ||
| Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | ||
| ELECTRICAL CHARACTERISTICS (Typical Values at VCC VEE = 30V and TA = 25C, unless otherwise specified) | ||||||
| High Level Supply Current | ICCH | IF = 10mA, VCC = 30V, VO = Open | 2.4 | 3.5 | mA | |
| Low Level Supply Current | ICCL | IF = 0mA, VCC = 30V, VO = Open | 2.5 | 3.5 | mA | |
| High Level Output Current | IOH | Maximum Pulse Width = 50s, VO = VCC 1.5V | -1.0 | A | ||
| Maximum Pulse Width = 10s, VO = VCC 4V | -2.5 | A | ||||
| Low Level Output Current | IOL | Maximum Pulse Width = 50s, VO = VEE + 1.5V | 1.0 | A | ||
| Maximum Pulse Width = 10s, VO = VEE + 4V | 2.5 | A | ||||
| High Level Output Voltage | VOH | IF = 10mA, IO = -100mA | VCC 0.3 | VCC 0.1 | V | |
| Low Level Output Voltage | VOL | IF = 0mA, IO = 100mA | VEE +0.1 | VEE +0.25 | V | |
| UVLO Threshold | VUVLO+ | VO > 5V, IF = 10mA | 11.0 | 12.7 | 13.5 | V |
| VUVLO- | VO < 5V, IF = 10mA | 9.5 | 11.2 | 12.0 | V | |
| UVLO Hysteresis | UVLOHYS | 1.5 | V | |||
| INPUT | ||||||
| Forward Voltage | VF | IF = 10mA | 1.2 | 1.37 | 1.8 | V |
| Forward Voltage Temperature Coefficient | VF/T | IF = 10mA | -1.237 | mV/C | ||
| Reverse Voltage | VR | IR = 10A | 5 | V | ||
| Input Threshold Current (Low to High) | IFLH | VCC = 30V, VO > 5V | 1.8 | 5 | mA | |
| Input Threshold Voltage (High to Low) | VFHL | VCC = 30V, VO < 5V | 0.8 | V | ||
| Input Capacitance | CIN | VF = 0V, f = 1MHz | 33 | pF | ||
| SWITCHING | ||||||
| Propagation Delay Time to High Output Level | tPLH | IF = 7 to 16mA, VCC = 15 to 30V, VEE = 0V, Rg = 10, Cg = 25nF, f = 10kHz, Duty Cycle = 50% | 50 | 130 | 500 | ns |
| Propagation Delay Time to Low Output Level | tPHL | (Same as tPLH) | 50 | 130 | 500 | ns |
| Pulse Width Distortion | PWD | for any given device | 5 | 70 | ns | |
| Propagation Delay Difference (tPHL - tPLH) between any two Devices | PDD | -100 | 100 | ns | ||
| Output Rise Time (10% to 90%) | tr | 35 | ns | |||
| Output Fall Time (90% to 10%) | tf | 35 | ns | |||
| Common Mode Transient Immunity at High Output Level | CMH | IF = 10 to 16mA, VCC = 30V, VCM = 1500V, TA = 25C | 35 | 50 | kV/s | |
| Common Mode Transient Immunity at Low Output Level | CML | VF = 0V, VCC = 30V, VCM = 1500V, TA = 25C | 35 | 50 | kV/s | |
| UVLO Turn Off Delay | tUVLO OFF | IF = 10mA, VO < 5V | 0.4 | s | ||
| UVLO Turn On Delay | tUVLO ON | IF = 10mA, VO > 5V | 1.6 | s | ||
| ISOLATION | ||||||
| Insulation Voltage | VISO | R.H. = 40% - 60%, TA = 25C, t = 1 min | 5000VRMS | |||
| Input - Output Resistance | RI-O | VI-O = 500VDC | 1012 | |||
| Input - Output Capacitance | CI-O | f = 1MHz | 0.92 | pF | ||
| ORDER INFORMATION | ||||||
| Device Marking | PN | |||||
| Standard DIP8 | ICPL3120 | Packing quantity: 50 pcs per tube | ||||
| 10mm Lead Spacing | ICPL3120G | Packing quantity: 50 pcs per tube | ||||
| Surface Mount | ICPL3120SM | Packing quantity: 50 pcs per tube | ||||
| Surface Mount Tape & Reel | ICPL3120SMT&R | Packing quantity: 1000 pcs per reel | ||||
| Device Part Number Format | ICPL3120 IYWW | I denotes Isocom, Y denotes 1 digit Year code, WW denotes 2 digit Week code | ||||
2410121637_ISOCOM-ICPL3120SMT-R_C255759.pdf
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
