digital isolator HopeRF Micro-electronics CMT8041N1 with SiO2 insulation and quad channel communication
Product Overview
The CMT804X is a high-performance, quad-channel digital isolator utilizing SiO2 insulation, supporting isolation voltages up to 5 kVrms. It facilitates communication between different power domains, preventing noise currents from entering local grounds or interfering with sensitive circuits. The device features an enable pin for high-impedance output in multi-master configurations, reducing power consumption. It offers up to four forward and two backward channels. The CMT804X1 defaults to a high output level upon loss of power or signal, while the CMT804X0 defaults to a low output level. The series boasts enhanced electromagnetic compatibility (EMC) with low radiation and high immunity to ESD, EFT, and surges, achieved through innovative chip design and layout. Available in both SOIC-16 wide and narrow body packages.
Product Attributes
- Brand: HOPERF
- Certifications: DIN VDE V 0884-11: 2017-01, UL 1577 Component Certification, CSA Certified (IEC 60950-1, IEC 62368-1, IEC 61010-1, IEC 60601-1), CQC Certified (GB4943.1-2022), TUV Certified (EN 60950-1, EN 62368-1, EN 61010-1)
- Material: SiO2 insulation
- Origin: www.hoperf.cn
Technical Specifications
| Parameter | Symbol | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | ||||||
| Power Supply Voltage | VDD1, VDD2 | -0.5 | 6 | V | ||
| Max Input Voltage | INx, EN1, EN2 | x = A, B, C, D | -0.4 | VDD+0.4 | V | |
| Max Output Voltage | OUTx | x = A, B, C, D | -0.4 | VDD+0.4 | V | |
| Max Input/Output Pulse Voltage | Pulse width < 100 ns, duty cycle < 10% | -0.8 | VDD+0.8 | V | ||
| Transient Common Mode Rejection | CMTI | ±200 | kV/μs | |||
| Output Current | IO | -15 | 15 | mA | ||
| Max Surge Immunity | 8 | kV | ||||
| Operating Temperature | TA | -40 | 125 | °C | ||
| Storage Temperature | TSTG | -40 | 150 | °C | ||
| Recommended Operating Conditions | ||||||
| Power Supply Voltage | VDD1, VDD2 | 2.5 | 5 | 5.5 | V | |
| High Level Input Voltage | VIH | VDDI: Input side VDD | 2 | VDDI | V | |
| Low Level Input Voltage | VIL | VDDI: Input side VDD | 0 | 0.8 | V | |
| Data Rate | DR | 0 | 150 | Mbps | ||
| Operating Temperature | TA | -40 | 25 | 125 | °C | |
| Junction Temperature | TJ | -40 | 150 | °C | ||
| ESD Ratings | ||||||
| Electrostatic Discharge | VESD | Human Body Model (HBM) | ±8000 | V | ||
| Component Charge Mode (CDM) | ±2000 | V | ||||
| Key Features | ||||||
| Data Rate | 150 | Mbps | ||||
| Wide Supply Voltage Range | 2.5 | 5.5 | V | |||
| Operating Ambient Temperature Range | -40 | 125 | °C | |||
| Robust Isolation Barrier | Expected Lifetime | >40 | years | |||
| Isolation Rating | up to 5 | kVRMS | ||||
| Surge Capability | up to 8 | kV | ||||
| Typical CMTI | ±200 | kV/μs | ||||
| Low Power Consumption | Current per channel at 1 Mbps | 1.5 | mA | |||
| Low Propagation Delay | Typical (powered by 5V) | 9 | ns | |||
| Package Information | ||||||
| Package | SOIC16 (Wide and Narrow Body) | |||||
| Ordering Information | CMT804X NB(N)SOIC-16 (Narrow), WB(W) SOIC-16 (Wide) | |||||
2508011705_HopeRF-Micro-electronics-CMT8041N1_C32713189.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
