Analog optocoupler Broadcom HCNR201-300E designed for stable and linear isolation of analog signals
Broadcom HCNR200/201 High-Linearity Analog Optocouplers
Product Overview
The Broadcom HCNR200/201 is a high-linearity analog optocoupler featuring a high-performance AlGaAs LED coupled with two closely matched photodiodes. The input photodiode monitors and stabilizes the LED's light output, virtually eliminating nonlinearity and drift. The output photodiode generates a photocurrent linearly related to the LED's light output. This design ensures high linearity and stable gain, making it ideal for isolating analog signals in applications demanding good stability, linearity, bandwidth, and low cost. The HCNR200/201 offers flexibility for various operating modes, including unipolar/bipolar, AC/DC, and inverting/noninverting configurations, providing an excellent solution for analog signal isolation challenges.
Product Attributes
- Brand: Broadcom
- Series: HCNR200/201
- Package Options: 8-pin DIP (0.400-in. spacing), Surface Mount (Option #300)
- Safety Approvals: UL 1577 recognized (5 kV rms/1 min. rating), CSA approved, IEC/EN/DIN EN 60747-5-5 approved (for specific options)
- RoHS Compliance: Available (indicated by -XXXE options)
Technical Specifications
| Parameter | Model | Min. | Typ. | Max. | Units | Conditions |
|---|---|---|---|---|---|---|
| Low Nonlinearity (Best Fit) | HCNR200 | - | 0.01 | 0.25 | % | 5 nA < IPD < 50 A, 0V < VPD < 15V |
| Low Nonlinearity (Best Fit) | HCNR201 | - | 0.01 | 0.05 | % | 5 nA < IPD < 50 A, 0V < VPD < 15V |
| Transfer Gain (K3) | HCNR200 | 0.85 | 1.00 | 1.15 | - | 5 nA < IPD < 50 A, 0V < VPD < 15V |
| Transfer Gain (K3) | HCNR201 | 0.95 | 1.00 | 1.05 | - | 5 nA < IPD < 50 A, 0V < VPD < 15V |
| Gain Temperature Coefficient | HCNR200/201 | - | -65 | - | ppm/C | -40C < TA < 85C, 5 nA < IPD < 50 A, 0V < VPD < 15V |
| Bandwidth | HCNR200/201 | - | DC | > 1 MHz | - | - |
| Input-Output Test Voltage | HCNR200/201 (-050E/-350E/-550E) | - | - | 1414 | Vpeak | VIORM (IEC/EN/DIN EN 60747-5-5) |
| Input-Output Momentary-Withstand Voltage | HCNR200/201 | 5000 | - | - | V rms | RH 50%, t = 1 min. (UL 1577) |
| LED Forward Voltage (VF) | HCNR200/201 | - | 1.3 | 1.85 | V | IF = 10 mA |
| Operating Temperature | HCNR200/201 | -40 | - | +85 | C | - |
| Applications | - | Low cost analog isolation, Telecom (Modem, PBX), Industrial process control (Transducer isolator, Isolator for thermocouples, 4 mA to 20 mA loop isolation), SMPS feedback loop, SMPS feedforward, Monitor motor supply voltage, Medical | ||||
2410121836_Broadcom-HCNR201-300E_C6795973.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
