86--14775986446
Sellina@t.ecer.com
Online Service

Online Service

Contact Person
Sellina@t.ecer.com
8613528435210
+86 13528435210
quality High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation factory
<
quality High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation factory
>

High gain optocoupler Broadcom 6N139-000E with TTL compatible saturation voltage and high speed operation

Specifications
Output Current:
60mA
Vce Saturation(VCE(sat)):
400mV@0.5mA,2mA
Operating Temperature:
0℃~+70℃
Load Voltage:
18V
Reverse Voltage:
5V
Load Type:
Darlington Transistor
Current transfer ratio:
5000%;400%
Forward Current(If):
0.5mA
Input type:
DC
Isolation Voltage(Vrms):
3.75kV
Pd - Power Dissipation:
135mW
Number of Channels:
1
Mfr. Part #:
6N139-000E
Package:
DIP-8
Key Attributes
Model Number: 6N139-000E
Product Description

Product Overview

The HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, and 6N138 are high gain optocouplers designed for efficient current transfer between input and output. These devices utilize a Light Emitting Diode and an integrated high gain photodetector, offering TTL-compatible saturation voltages and high-speed operation. Separate pins for the photodiode and output stage allow for flexible configuration. The 6N139, HCPL-0701, and HCNW139 are optimized for CMOS, LSTTL, or other low-power applications, guaranteeing a minimum 400% current transfer ratio (CTR) over a 0 to 70C range with only 0.5 mA of LED current. The 6N138, HCPL-0700, and HCNW138 are designed for TTL applications, providing a minimum 300% CTR at 1.6 mA LED current. These optocouplers are suitable for applications requiring ground isolation, low input current line reception, high voltage insulation, and status indication in various logic families and line voltage monitoring.

Product Attributes

  • Brand: Avago Technologies
  • Certifications: UL Recognized, CSA Approved, IEC/EN/DIN EN 60747-5-5 approved (HCNW139/138 and specific options)
  • Compliance: RoHS 6 fully compliant options available
  • Material Group: Material Group IIIa (DIN VDE 0110, 1/89, Table 1)

Technical Specifications

Model Package Type Minimum Input ON Current (IF) Minimum CTR Maximum VCC UL 5000 Vrms/1 Minute Rating IEC/EN/DIN EN 60747-5-5
6N139, HCPL-0701, HCNW139 8-Pin DIP (300 Mil), SO-8, Widebody (400 mil) 0.5 mA 400% 18 V N/A N/A
6N138, HCPL-0700, HCNW138 8-Pin DIP (300 Mil), SO-8, Widebody (400 mil) 1.6 mA 300% 7 V N/A N/A
HCPL-4701, HCPL-4731, HCPL-070A, HCPL-073A N/A 40 A 800% 18 V N/A N/A
HCPL-5701, HCPL-5700, HCPL-5731, HCPL-5730 Hermetic 0.5 mA 300% 20 V N/A N/A
Parameter Symbol 8-Pin DIP (300 Mil) SO-8 Widebody (400 Mil) Units Conditions
Minimum External Air Gap (External Clearance) L(101) 7.1 4.9 9.6 mm Measured from input terminals to output terminals, shortest distance through air.
Minimum External Tracking (External Creepage) L(102) 7.4 4.8 10.0 mm Measured from input terminals to output terminals, shortest distance path along body.
Minimum Internal Plastic Gap (Internal Clearance) 0.08 0.08 1.0 mm Through insulation distance, conductor to conductor.
Tracking Resistance (Comparative Tracking Index) CTI 200 200 200 Volts DIN IEC 112/VDE 0303 Part 1
Input-Output Momentary Withstand Voltage VISO 3750 N/A N/A V rms RH < 50%, t = 1 min., TA = 25C
Input-Output Momentary Withstand Voltage (Option 020) VISO N/A N/A 5000 V rms RH < 50%, t = 1 min., TA = 25C
Storage Temperature TS -55 to 125 C
Operating Temperature TA -40 to 85 C (0C to 70C on JEDEC Registration)
Average Forward Input Current IF(AVG) 20 mA
Peak Forward Input Current (50% Duty Cycle, 1 ms Pulse Width) IFPK 40 mA
Reverse Input Voltage VR 5 N/A 3 V (HCNW139/138)
Input Power Dissipation PI 35 mW
Output Current (Pin 6) IO 60 mA
Supply Voltage and Output Voltage (6N139, HCPL-0701, HCNW139) VCC -0.5 to 18 V
Supply Voltage and Output Voltage (6N138, HCPL-0700, HCNW138) VCC -0.5 to 7 V
Output Power Dissipation PO 100 mW
Total Power Dissipation PT 135 mW
Power Supply Voltage VCC 4.5 18 V
Forward Input Current (ON) IF(ON) 0.5 12.0 mA
Forward Input Voltage (OFF) VF(OFF) 0 0.8 V
Current Transfer Ratio (CTR) CTR 400* - 5000 400 - 4500 300* - 2600 % IF = 0.5 mA to 12 mA, VCC = 4.5 V, VO = 0.4 V
Logic Low Output Voltage VOL 0.1 - 0.2 0.1 V IF = 0.5 mA to 12 mA, IO = 2 mA to 24 mA
Logic High Output Current IOH 0.05 - 0.1 100 - 250 A VO = VCC = 18 V (7 V for HCNW138), IF = 0 mA
Propagation Delay Time to Logic Low tPHL 5 - 15 1.6 - 15 s IF = 0.5 mA to 1.6 mA, Rl = 4.7 k to 2.2 k
Propagation Delay Time to Logic High tPLH 18 - 50 2 - 50 s IF = 0.5 mA to 1.6 mA, Rl = 4.7 k to 2.2 k
Common Mode Transient Immunity at Logic High Output |CMH| 1000 - 10000 V/s IF = 0 mA, Rl = 2.2 k, |VCM| = 10 Vp-p
Common Mode Transient Immunity at Logic Low Output |CML| 1000 - 10000 V/s IF = 1.6 mA, Rl = 2.2 k, |VCM| = 10 Vp-p

2410121720_Broadcom-6N139-000E_C691909.pdf

Related Products
  • quality Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection factory

    Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection

    Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp

  • quality Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines factory

    Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines

    Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and

  • quality Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package factory

    Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package

    Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.

  • quality Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector factory

    Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector

    Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max