High Peak Output Current Optocoupler Broadcom ACPL-P343-000E for Gate Drive in Motor Control Inverter Systems
Product Overview
The Broadcom ACPL-P343 and ACPL-W343 are optocouplers designed for driving power IGBTs and MOSFETs in motor control inverter applications. Featuring an integrated AlGaAs LED and a power output stage, these devices offer a high operating voltage range suitable for gate-controlled devices. They provide high peak output current and drive voltages required for IGBTs up to 1200V/200A, or can drive discrete power stages for higher-rated IGBTs. Key advantages include a rail-to-rail output voltage for optimal IGBT gate drive, high common mode rejection (CMR) for noisy industrial environments, and integrated hysteresis for LED current input to prevent output oscillation. The compact Stretched SO6 package facilitates smaller, more efficient designs.
Product Attributes
- Brand: Broadcom
- Technology: BCDMOS
- Package Type: Stretched SO6
- Certifications: UL Recognized, CSA, IEC/EN/DIN EN 60747-5-5
- RoHS Compliant: Yes
Technical Specifications
| Feature/Model | ACPL-P343 | ACPL-W343 | Units | Conditions |
|---|---|---|---|---|
| Maximum Peak Output Current | 4.0 | A | Maximum | |
| Minimum Peak Output Current | 3.0 | A | Minimum | |
| Maximum Propagation Delay | 200 | ns | tPLH | |
| Maximum Propagation Delay Difference | 100 | ns | (tPHL - tPLH) | |
| Minimum Common Mode Rejection (CMR) | 35 | kV/s | at VCM = 1500V | |
| Maximum Supply Current (ICC) | 3.0 | mA | ||
| Wide Operating VCC Range | 15 to 30 | V | (VCC VEE) | |
| Industrial Temperature Range | 40 to 105 | C | TA | |
| UL Recognized Insulation Voltage | 3750 | 5000 | VRMS | for 1 min. (UL1577) |
| IEC/EN/DIN EN 60747-5-5 VIORM | 891 | 1140 | Vpeak | Maximum Working Insulation Voltage |
| Output Supply Voltage (VCC VEE) | 15 - 30 | V | Recommended Operating Conditions | |
| Input Current (ON) | 7 - 16 | mA | Recommended Operating Conditions | |
| Input Voltage (OFF) | 3.6 to 0.8 | V | Recommended Operating Conditions | |
| High Level Peak Output Current (IOH) | -2.8 (Typ) | A | VO = VCC 4V | |
| Low Level Peak Output Current (IOL) | 3.5 (Typ) | A | VO = VEE + 2.5V | |
| Propagation Delay Time to High Output (tPLH) | 98 (Typ) | ns | ||
| Propagation Delay Time to Low Output (tPHL) | 95 (Typ) | ns | ||
| Output High Level Common Mode Transient Immunity (|CMH|) | 50 (Typ) | kV/s | at VCM = 1500V | |
| Output Low Level Common Mode Transient Immunity (|CML|) | 50 (Typ) | kV/s | at VCM = 1500V | |
| Input-Output Momentary Withstand Voltage (VISO) | 3750 | 5000 | VRMS | t = 1 minute |
| External Clearance (L(101)) | 7.0 (ACPL-P343) / 8.0 (ACPL-W343) | mm | Minimum | |
| External Creepage (L(102)) | 8.0 | mm | Minimum | |
Applications
- IGBT/MOSFET gate drive
- AC and brushless DC motor drives
- Renewable energy inverters
- Industrial inverters
- Switching power supplies
Note
CAUTION! It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation that may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments.
2412201956_Broadcom-ACPL-P343-000E_C19673754.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
