86--13667332386
quality diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity factory
quality diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity factory

diode transistor optocoupler Broadcom HCPL 050L 500E with high speed and common mode transient immunity

Key Attributes
Model Number: HCPL-050L-500E
Product Custom Attributes
Power Dissipation:
100mW
Output Current:
8mA
Low Level Delay Time:
650ns
High Level Delay Time:
350ns
Reverse Voltage:
5V
Voltage - Forward(Vf):
1.7V
Current Transfer Ratio:
15%
Voltage - Supply:
2.7V~7V
Forward Current(If):
20mA
Operating Temperature:
-55℃~+100℃
CMTI(kV/us):
1kV/us
Number Of Channels:
1
Input Threshold Current:
-
Isolation Voltage(Vrms):
3.75kV
Input Type:
DC
Mfr. Part #:
HCPL-050L-500E
Package:
SOP-8
Product Description

Product Overview

These diode-transistor optocouplers provide electrical insulation between input and output using an internal insulating layer between a LED and a photodetector. Enhanced speed, up to a hundred times that of conventional photo-transistor couplers, is achieved by reducing base-collector capacitance through separate photodiode bias and output-transistor collector connections. Available in 8-pin DIP and SO-8 packages, these optocouplers offer low power consumption and are compatible with LVTTL/LVCMOS or wide bandwidth analog applications. They boast a minimum common mode transient immunity of 1000 V/s. Key applications include high voltage insulation, video signal isolation, power translator isolation in motor drives, line receivers, feedback elements in switched mode power supplies, high-speed logic ground isolation, and as replacements for pulse transformers and slow phototransistor isolators.

Product Attributes

  • Brand: Avago Technologies
  • Certifications: UL Recognized (UL1577), CSA Component Acceptance Notice #5, IEC/EN/DIN EN 60747-5-2
  • Package Types: 8-pin DIP, SO-8
  • Lead Free Options Available
  • RoHS 6 fully compliant options available

Technical Specifications

Model Package Type Description Supply Voltage (VCC) Data Rate Common Mode Transient Immunity (Min) Operating Temperature Safety Approval
HCPL-250L 8-pin DIP LVTTL/LVCMOS Compatible 3.3V / 5V 1 Mb/s 1000 V/s 0C to +70C UL, CSA, IEC/EN/DIN EN 60747-5-2
HCPL-050L SO-8 LVTTL/LVCMOS Compatible 3.3V / 5V 1 Mb/s 1000 V/s 0C to +70C UL, CSA, IEC/EN/DIN EN 60747-5-2
HCPL-253L 8-pin DIP LVTTL/LVCMOS Compatible 3.3V / 5V 1 Mb/s 1000 V/s 0C to +70C UL, CSA, IEC/EN/DIN EN 60747-5-2
HCPL-053L SO-8 LVTTL/LVCMOS Compatible 3.3V / 5V 1 Mb/s 1000 V/s 0C to +70C UL, CSA, IEC/EN/DIN EN 60747-5-2
Electrical Specifications (DC) Over Recommended Temperature (TA = 0C to +70C), VCC = 3.3 V, IF = 16 mA
Parameter Device Min Typ. Max Units Test Conditions Note
Current Transfer Ratio (CTR) All 15 20-50 50 % TA = 25C, VO = 0.4 V, IF = 16 mA, VCC = 3.3 V 5, 11
Logic Low Output Voltage (VOL) All 0.05 0.3 0.3 V TA = 25C, IO = 3.0 mA, IF = 16 mA, VCC = 3.3 V
Logic High Output Current (IOH) All 0.003 1 A TA = 25C, VO = VCC = 3.3 V, IF = 0 mA
Input Forward Voltage (VF) All 1.52 1.7 V TA = 25C, IF = 16 mA
Switching Specifications (AC) Over Recommended Temperature (TA = 0C to +70C), VCC = 3.3 V, IF = 16 mA
Parameter Device Min Typ.* Max Units Test Conditions Note
Propagation Delay Time to Logic Low (tPHL) All 0.35 1 s RL = 1.9 k, VCM = 10 Vp-p 8, 9
Propagation Delay Time to Logic High (tPLH) All 0.65 1 s RL = 1.9 k, VCM = 10 Vp-p 8, 9
Common Mode Transient Immunity (CMH) All 1 kV/s RL = 4.1 k, IF = 0 mA, TA = 25C, VCM = 10 Vp-p, CL = 15 pF 7, 8, 9
Common Mode Transient Immunity (CML) All 1 kV/s RL = 4.1 k, IF = 16 mA, TA = 25C, VCM = 10 Vp-p, CL = 15 pF 7, 8, 9
Package Characteristics
Parameter Device Min Typ.* Max Units Test Conditions Note
Input-Output Withstand Voltage (VISO) 8-Pin DIP 3750 V rms t = 1 min., RH < 50%, TA = 25C **
Input-Output Withstand Voltage (VISO) SO-8 3750 V rms t = 1 min., RH < 50%, TA = 25C **
Input-Output Resistance (RI-O) 8-Pin DIP 1012 VI-O = 500 Vdc
Input-Output Capacitance (CI-O) 8-Pin DIP 0.6 pF f = 1 MHz

**The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics Table (if applicable), your equipment level safety specification or Avago Application Note 1074 entitled "Optocoupler Input-Output Endurance Voltage," publication number 5963-2203E.


2409291833_Broadcom-HCPL-050L-500E_C692011.pdf

Contact Our Experts And Get A Free Consultation!

Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.