86--14775986446
Sellina@t.ecer.com
Online Service

Online Service

Contact Person
Sellina@t.ecer.com
8613528435210
+86 13528435210
quality Power stage IGBT gate driver optocoupler Broadcom ACPL-332J-500E with UVLO and active Miller clamp features factory
<
quality Power stage IGBT gate driver optocoupler Broadcom ACPL-332J-500E with UVLO and active Miller clamp features factory
>

Power stage IGBT gate driver optocoupler Broadcom ACPL-332J-500E with UVLO and active Miller clamp features

Specifications
Power Dissipation:
600mW
Output Current:
2.5A
Low Level Delay Time:
250ns
High Level Delay Time:
250ns
Reverse Voltage:
5V
Voltage - Forward(Vf):
1.6V
Voltage - Supply:
15V~30V
Forward Current(If):
12mA
Operating Temperature:
-40℃~+105℃
CMTI(kV/us):
25kV/us
Number of Channels:
1
Input threshold current:
6mA
Isolation Voltage(Vrms):
5kV
Input Type:
DC
Mfr. Part #:
ACPL-332J-500E
Package:
SOP-16-300mil
Key Attributes
Model Number: ACPL-332J-500E
Product Description

Product Overview

The ACPL-332J is an advanced, intelligent 2.5 A output current IGBT gate driver optocoupler designed for compact, affordable, and easy implementation of IGBT VCE fault protection. It integrates key features such as VCE desaturation detection, under-voltage lockout (UVLO) with hysteresis, active Miller clamping, and isolated fault status feedback. This optocoupler is ideal for driving power IGBTs and MOSFETs in motor control inverter applications, directly handling IGBTs up to 1200 V and 150 A, or driving discrete power stages for higher-rated IGBTs. Its robust design ensures high design flexibility and circuit protection.

Product Attributes

  • Brand: Avago Technologies (implied by datasheet source)
  • Package Type: SO-16
  • Certifications: UL approved, CSA approved, IEC/EN/DIN-EN 60747-5-5 approved
  • RoHS Compliant: Available (e.g., -xxxE denotes lead-free product)

Technical Specifications

Parameter Symbol Value Units Conditions
Maximum Peak Output Current IOH(PEAK) 2.5 A
Minimum Peak Output Current IOL(PEAK) 2.0 A
Maximum Propagation Delay tPLH, tPHL 250 ns Over temperature range
Maximum Pulse Width Distortion (PWD) PWD 100 ns
Minimum Common Mode Rejection (CMR) |CMH|, |CML| 50 kV/s at VCM = 1500 V (with 1nF CF)
Maximum Supply Current ICC(max) < 5 mA
Wide VCC Operating Range VCC1 15 to 30 V (VCC2 - VEE)
Wide Operating Temperature Range TA -40 to 105 C
Insulation Voltage (VIORM) VIORM 1230 VPEAK
Desaturation Detection Threshold VDESAT 6.0 - 7.5 V
UVLO Threshold (Positive Going) VUVLO+ 10.5 - 12.5 V
UVLO Threshold (Negative Going) VUVLO- 9.2 - 11.1 V
Miller Clamp Current ICL 1.7 A (Peak)
Input-Output Momentary Withstand Voltage VISO 5000 Vrms for 1 minute (UL 1577)
Package Outline SO-16 Surface Mount

2410121933_Broadcom-ACPL-332J-500E_C41526.pdf

Related Products
  • quality Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection factory

    Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection

    Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp

  • quality Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines factory

    Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines

    Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and

  • quality Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package factory

    Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package

    Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.

  • quality Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector factory

    Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector

    Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max