1.5 amp output current IGBT gate driver Broadcom ACPL-330J-500E optocoupler with fault feedback and soft turn off capability
Product Overview
The ACPL-330J is an advanced, intelligent 1.5 A output current IGBT gate driver optocoupler designed for compact, affordable, and easy implementation of IGBT VCE fault protection. It offers integrated VCE desaturation detection, under-voltage lockout (UVLO), "soft" IGBT turn-off, isolated open collector fault feedback, and active Miller clamping, providing maximum design flexibility and circuit protection. This device is ideally suited for driving power IGBTs and MOSFETs in motor control inverter applications, capable of directly driving IGBTs up to 1200 V and 100 A, or driving discrete power stages for higher-rated IGBTs. It features a high insulation voltage of VIORM = 1414 VPEAK.
Product Attributes
- Brand: Avago Technologies
- Compliance: Lead (Pb) Free, RoHS 6 fully compliant
- Safety Approvals: UL, CSA, IEC/EN/DIN-EN 60747-5-5
Technical Specifications
| Feature | Specification | Details |
|---|---|---|
| Output Current (Peak) | Maximum | 1.5 A |
| Output Current (Peak) | Minimum | 1.0 A |
| Propagation Delay | Maximum | 250 ns (over temperature range) |
| Active Miller Clamp | 1.0 A | |
| Pulse Width Distortion (PWD) | Maximum | 100 ns |
| Common Mode Rejection (CMR) | Minimum | 50 kV/s (at VCM = 1500 V) |
| Supply Current (ICC(max)) | Maximum | < 5 mA |
| VCC Operating Range | 15 V to 30 V (over temperature range) | |
| Operating Temperature Range | -40C to 105C | |
| Insulation Voltage | VIORM | 1414 VPEAK |
| Insulation Voltage (UL) | VISO | 5000 VRMS (for 1 minute) |
| Package | SO-16 | |
| Fault Feedback | Type | Open Collector, Isolated |
| IGBT Turn-off | Type | "Soft" |
| Fault Reset | Type | Automatic (after fixed Mute Time, typically 26ms) |
| Desaturation Detection Threshold | 6.5 V (internal reference) | |
| UVLO Threshold (Positive Going) | VUVLO+ | 10.5 V to 12.5 V |
| UVLO Threshold (Negative Going) | VUVLO- | 9.2 V to 11.1 V |
| High Level Output Current (IOH) | -0.3 A to -1.0 A (depending on VO) | |
| Low Level Output Current (IOL) | 0.3 A to 1.0 A (depending on VO) | |
| Output IC Power Dissipation (PO) | Maximum | 600 mW |
| Input IC Power Dissipation (PI) | Maximum | 150 mW |
| Applications | Isolated IGBT/Power MOSFET gate drive, AC and brushless DC motor drives, Industrial inverters, Uninterruptible Power Supply (UPS) |
2410121725_Broadcom-ACPL-330J-500E_C908115.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
