Current Sensing Using Broadcom HCPL-786J-000E Optically Isolated Modulator in Power Inverter Systems
Product Overview
The HCPL-7860/HCPL-786J Optically Isolated Modulator, when paired with the HCPL-0872 Digital Interface IC or a digital filter, forms a two-chip isolated programmable analog-to-digital converter. This system is designed for direct measurement of motor phase currents in power inverters. The HCPL-7860/HCPL-786J utilizes Sigma-Delta () over-sampling modulation to convert a low-bandwidth analog input into a high-speed one-bit data stream, offering high noise margins and excellent immunity to isolation-mode transients. The data and clock are transmitted across an isolation boundary for recovery and decoding. Key applications include motor phase and rail current sensing, data acquisition systems, industrial process control, and general-purpose current sensing and monitoring.
Product Attributes
- Brand: Avago Technologies
- Compliance: Lead (Pb) Free, RoHS 6 fully compliant options available.
- Certifications: UL 1577, CSA, IEC/EN/DIN EN 60747-5-5
- Safety Approvals: UL Recognized (HCPL-7860: 3750 Vrms, HCPL-786J: 5000 Vrms)
- Handling Precautions: Normal static precautions advised.
- Application Restrictions: Not for military or aerospace applications.
Technical Specifications
| Feature/Model | HCPL-7860 | HCPL-786J | Unit | Conditions |
|---|---|---|---|---|
| Linearity | 12-bit | - | - | |
| Conversion Time (Pre-Trigger Mode 2 with HCPL-0872) | 200 | ns | - | |
| Effective Resolution (5 s Signal Delay) | 12-bit | - | (14-bit with 102 s) | |
| Fast Over-Range Detection (with HCPL-0872) | 3 | s | - | |
| Input Range | 200 | mV | Single 5 V Supply | |
| Internal Reference Voltage Matching | 1 | % | - | |
| Operating Temperature Range | -40 to +85 | C | - | |
| Isolation Transient Immunity | 15 | kV/s | - | |
| Supply Voltage (VDD1, VDD2) | 4.5 to 5.5 | V | - | |
| Input Supply Current (IDD1) | 10-15 | mA | VIN+ = -350 mV to +350 mV | |
| Output Supply Current (IDD2) | 10-15 | mA | - | |
| Output Clock Frequency (fCLK) | 8.2-13.2 | MHz | - | |
| Integral Nonlinearity (INL) | 0.01-0.14 | % | - | |
| Signal-to-Noise Ratio (SNR) | 62-73 | dB | VIN+ = 35 Hz, 400 mVpk-pk (141 mVrms) sine wave | |
| Signal Delay (tDSIG) | 19-23 | s | - | |
| Signal Bandwidth (BW) | 18-22 | kHz | - | |
| Input-Output Momentary Withstand Voltage (VISO) | 3750 | 5000 | Vrms | RH 50%, t = 1 min; TA = 25C |
| Input-Output Resistance (RI-O) | 1012-1013 | VI-O = 500 Vdc | ||
| Input-Output Capacitance (CI-O) | 1.4 | pF | f = 1 MHz | |
| Package Type | DIP-8, Gull Wing Surface Mount | SO-16 | - | - |
| Ordering Option (RoHS Compliant) | -000E, -300E, -500E | -000E, -500E | - | - |
2410121758_Broadcom-HCPL-786J-000E_C191647.pdf
-
Industrial Control Optocoupler IL4208-X017T with 800 Volt Blocking Voltage and High dVdt Protection
Product OverviewThe Vishay Semiconductors IL420 and IL4208 are optocouplers featuring a GaAs IRLED optically coupled to a photosensitive non-zero crossing TRIAC network. They are designed for isolating low-voltage logic from AC mains lines, controlling various loads with high dV/dt and low input current sensitivity. The devices offer high input sensitivity (IFT < 2 mA), high blocking voltage (up to 800 V), and high static dV/dt (> 10 kV/s) due to a proprietary dV/dt clamp
-
Optocoupler VISHAY BRT23F featuring GaAs IRLED and zero crossing detector for isolation of low voltage logic from AC lines
Product OverviewThe BRT21, BRT22, BRT23 is an optocoupler featuring an optically coupled GaAs IRLED to a photosensitive thyristor system. It includes integrated noise suppression and a zero crossing circuit, enabling low trigger currents of 1.2 mA and high dV/dt ratios of over 10 kV/s with load voltages up to 800 V. This product family offers a microcontroller-friendly solution for isolating low-voltage logic from high-voltage AC lines (120 VAC, 240 VAC, 380 VAC) and
-
Optocoupler with GaAs Infrared Diode and Silicon Phototransistor VISHAY VOL617A-2X001T 4 Pin LSOP Package
Product OverviewThe VOL617A is an optocoupler featuring a GaAs infrared emitting diode coupled to a silicon planar phototransistor, housed in a 4-pin LSOP wide body package. It offers a high current transfer ratio, low coupling capacitance, and high isolation voltage, making it suitable for signal transmission between electrically separated circuits. Key advantages include a low profile, high collector-emitter voltage (VCEO = 80 V), and an isolation test voltage of 5000 VRMS.
-
Phototransistor Output Optocoupler VISHAY SFH6156-4T with GaAs Infrared Diode and Silicon Planar Detector
Product OverviewThe Vishay Semiconductors SFH6156 is a high reliability optocoupler featuring a phototransistor output. It offers excellent CTR linearity, low coupling capacitance, and high isolation voltage (5300 VRMS). Designed for signal transmission between electrically separated circuits, it utilizes a GaAs infrared diode emitter optically coupled to a silicon planar phototransistor detector in a plastic SMD package. Key advantages include fast switching times and low
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
